https://bugzilla.kernel.org/show_bug.cgi?id=218943 --- Comment #18 from Jarrard (jarrard@xxxxxxxxx) --- Here is a more truncated dmesg log, ran it a few times and this seems to be the sum of the log when plugging the device in. Removed most the xhci_get_isoc_frame_id: index 0........ stuff Keep in mind this USB capture card has around 3 devices on it from what I can see. Video, Audio, RGB Lighting. [ 1560.044886] xhci_hcd 0000:30:00.3: udev->tt = 0000000000000000 [ 1560.044890] xhci_hcd 0000:30:00.3: udev->ttport = 0x0 [ 1560.044895] xhci_hcd 0000:30:00.3: // Ding dong! [ 1560.052981] usb 4-4: Device not responding to setup address. [ 1560.053033] xhci_hcd 0000:30:00.3: // Ding dong! [ 1560.053055] xhci_hcd 0000:30:00.3: // Ding dong! [ 1560.053092] xhci_hcd 0000:30:00.3: Slot 7 output ctx = 0x0x00000000fff26000 (dma) [ 1560.053098] xhci_hcd 0000:30:00.3: Slot 7 input ctx = 0x0x00000000fff17000 (dma) [ 1560.053105] xhci_hcd 0000:30:00.3: Set slot id 7 dcbaa entry 00000000dcd62c49 to 0xfff26000 [ 1560.053130] xhci_hcd 0000:30:00.3: xhci_get_isoc_frame_id: index 0, reg 0xac3 start_frame_id 0x159, end_frame_id 0x4d7, start_frame 0x164 [ 1560.054017] xhci_hcd 0000:30:00.3: Port change event, 4-4, id 8, portsc: 0xe0202a0 [ 1560.054025] xhci_hcd 0000:30:00.3: handle_port_status: starting usb4 port polling. [ 1560.256853] xhci_hcd 0000:30:00.3: Set root hub portnum to 8 [ 1560.256857] xhci_hcd 0000:30:00.3: Set fake root hub portnum to 4 [ 1560.256861] xhci_hcd 0000:30:00.3: udev->tt = 0000000000000000 [ 1560.256865] xhci_hcd 0000:30:00.3: udev->ttport = 0x0 [ 1560.256871] xhci_hcd 0000:30:00.3: // Ding dong! [ 1560.264980] usb 4-4: Device not responding to setup address. [ 1560.265022] xhci_hcd 0000:30:00.3: // Ding dong! [ 1560.265045] xhci_hcd 0000:30:00.3: // Ding dong! [ 1560.265079] xhci_hcd 0000:30:00.3: Slot 7 output ctx = 0x0x00000000fff26000 (dma) [ 1560.265085] xhci_hcd 0000:30:00.3: Slot 7 input ctx = 0x0x00000000fff17000 (dma) [ 1560.265091] xhci_hcd 0000:30:00.3: Set slot id 7 dcbaa entry 00000000dcd62c49 to 0xfff26000 [ 1560.473834] usb 4-4: device not accepting address 25, error -71 [ 1560.473846] xhci_hcd 0000:30:00.3: Set port 4-4 link state, portsc: 0xe021203, write 0xe011261 [ 1560.481893] xhci_hcd 0000:30:00.3: // Ding dong! [ 1560.481911] xhci_hcd 0000:30:00.3: Bad real port. [ 1560.481918] usb usb4-port4: attempt power cycle [ 1560.481924] xhci_hcd 0000:30:00.3: set port power 4-4 OFF, portsc: 0xe021263 [ 1560.688829] xhci_hcd 0000:30:00.3: set port power 4-4 ON, portsc: 0xe020080 [ 1560.792813] xhci_hcd 0000:30:00.3: // Ding dong! [ 1560.792835] xhci_hcd 0000:30:00.3: Slot 7 output ctx = 0x0x00000000fff26000 (dma) [ 1560.792841] xhci_hcd 0000:30:00.3: Slot 7 input ctx = 0x0x00000000fff17000 (dma) [ 1560.792849] xhci_hcd 0000:30:00.3: Set slot id 7 dcbaa entry 00000000dcd62c49 to 0xfff26000 [ 1560.792888] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe0202a0, return 0x102a0 [ 1560.792912] xhci_hcd 0000:30:00.3: set port reset, actual port 4-4 status = 0xe0202b0 [ 1560.854820] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe2a02a0, return 0x3102a0 [ 1560.854839] usb usb4-port4: not reset yet, waiting 60ms [ 1560.916802] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe2a02a0, return 0x3102a0 [ 1560.916831] usb usb4-port4: not reset yet, waiting 200ms [ 1561.120792] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe2a02a0, return 0x3102a0 [ 1561.120840] usb usb4-port4: not reset yet, waiting 200ms [ 1561.328770] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe2a02a0, return 0x3102a0 [ 1561.328790] usb usb4-port4: not reset yet, waiting 200ms [ 1561.536760] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe2a1203, return 0x310203 [ 1561.536780] xhci_hcd 0000:30:00.3: clear port4 reset change, portsc: 0xe0a1203 [ 1561.536794] xhci_hcd 0000:30:00.3: clear port4 warm(BH) reset change, portsc: 0xe021203 [ 1561.536810] xhci_hcd 0000:30:00.3: clear port4 link state change, portsc: 0xe021203 [ 1561.536824] xhci_hcd 0000:30:00.3: clear port4 connect change, portsc: 0xe001203 [ 1561.536837] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe001203, return 0x203 [ 1561.588756] xhci_hcd 0000:30:00.3: Set root hub portnum to 8 [ 1561.588762] xhci_hcd 0000:30:00.3: Set fake root hub portnum to 4 [ 1561.588766] xhci_hcd 0000:30:00.3: udev->tt = 0000000000000000 [ 1561.588770] xhci_hcd 0000:30:00.3: udev->ttport = 0x0 [ 1561.588776] xhci_hcd 0000:30:00.3: // Ding dong! [ 1561.589112] xhci_hcd 0000:30:00.3: xhci_get_isoc_frame_id: index 0, reg 0x3ac3 start_frame_id 0x759, end_frame_id 0x2d7, start_frame 0x764 [ 1561.589376] xhci_hcd 0000:30:00.3: Successful setup address command [ 1561.589383] xhci_hcd 0000:30:00.3: Op regs DCBAA ptr = 0x000000fffff000 [ 1561.589387] xhci_hcd 0000:30:00.3: Slot ID 7 dcbaa entry @00000000dcd62c49 = 0x000000fff26000 [ 1561.589393] xhci_hcd 0000:30:00.3: Output Context DMA address = 0xfff26000 [ 1561.589397] xhci_hcd 0000:30:00.3: Internal device address = 7 [ 1561.589404] usb 4-4: new SuperSpeed USB device number 26 using xhci_hcd [ 1561.784721] xhci_hcd 0000:30:00.3: xhci_hub_status_data: stopping usb4 port polling [ 1561.811955] usb 4-4: LPM exit latency is zeroed, disabling LPM. [ 1561.857239] usb 4-4: skipped 1 descriptor after configuration [ 1561.857246] usb 4-4: skipped 5 descriptors after interface [ 1561.857253] usb 4-4: skipped 2 descriptors after endpoint [ 1561.857259] usb 4-4: skipped 42 descriptors after interface [ 1561.857265] usb 4-4: skipped 2 descriptors after endpoint [ 1561.857270] usb 4-4: skipped 5 descriptors after interface [ 1561.857275] usb 4-4: skipped 2 descriptors after interface [ 1561.857281] usb 4-4: skipped 2 descriptors after endpoint [ 1561.870967] xhci_hcd 0000:30:00.3: Waiting for status stage event [ 1561.871029] usb 4-4: default language 0x0409 [ 1561.910158] usb 4-4: udev 26, busnum 4, minor = 409 [ 1561.910165] usb 4-4: New USB device found, idVendor=07ca, idProduct=2553, bcdDevice= 1.00 [ 1561.910172] usb 4-4: New USB device strings: Mfr=6, Product=7, SerialNumber=3 [ 1561.910177] usb 4-4: Product: Live Gamer Ultra 2.1 [ 1561.910183] usb 4-4: Manufacturer: AVerMedia [ 1561.910188] usb 4-4: SerialNumber: 5204140800332 [ 1561.910426] usb 4-4: usb_probe_device [ 1561.910432] usb 4-4: configuration #1 chosen from 1 choice [ 1561.910446] xhci_hcd 0000:30:00.3: add ep 0x85, slot id 7, new drop flags = 0x0, new add flags = 0x800 [ 1561.910456] xhci_hcd 0000:30:00.3: add ep 0x82, slot id 7, new drop flags = 0x0, new add flags = 0x820 [ 1561.910463] xhci_hcd 0000:30:00.3: xhci_check_bandwidth called for udev 0000000005f01f8b [ 1561.910472] xhci_hcd 0000:30:00.3: // Ding dong! [ 1561.911116] xhci_hcd 0000:30:00.3: xhci_get_isoc_frame_id: index 0, reg 0x4d3 [ 1561.916735] xhci_hcd 0000:30:00.3: Successful Endpoint Configure command [ 1561.916772] xhci_hcd 0000:30:00.3: // Ding dong! [ 1561.916784] xhci_hcd 0000:30:00.3: Stopped on No-op or Link TRB for slot 7 ep 10 [ 1561.916795] xhci_hcd 0000:30:00.3: // Ding dong! [ 1561.932735] xhci_hcd 0000:30:00.3: // Ding dong! [ 1561.932764] xhci_hcd 0000:30:00.3: Stopped on No-op or Link TRB for slot 7 ep 4 [ 1561.932772] xhci_hcd 0000:30:00.3: // Ding dong! -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
