https://bugzilla.kernel.org/show_bug.cgi?id=218943 --- Comment #17 from Jarrard (jarrard@xxxxxxxxx) --- Ok seems I'm a bit of a idiot and had secure boot enabled. Now the commands work. Got a whole bunch of stuff. [ 619.877598] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe2a1203, return 0x310203 [ 619.877612] xhci_hcd 0000:30:00.3: xhci_get_isoc_frame_id: index 0, reg 0x64b start_frame_id 0xca, end_frame_id 0x448, start_frame 0xd5 [ 619.877627] xhci_hcd 0000:30:00.3: clear port4 reset change, portsc: 0xe0a1203 [ 619.877641] xhci_hcd 0000:30:00.3: clear port4 warm(BH) reset change, portsc: 0xe021203 [ 619.877654] xhci_hcd 0000:30:00.3: clear port4 link state change, portsc: 0xe021203 [ 619.877667] xhci_hcd 0000:30:00.3: clear port4 connect change, portsc: 0xe001203 [ 619.877679] xhci_hcd 0000:30:00.3: Get port status 4-4 read: 0xe001203, return 0x203 ... [ 619.929597] xhci_hcd 0000:30:00.3: Set root hub portnum to 8 [ 619.929602] xhci_hcd 0000:30:00.3: Set fake root hub portnum to 4 [ 619.929606] xhci_hcd 0000:30:00.3: udev->tt = 0000000000000000 [ 619.929610] xhci_hcd 0000:30:00.3: udev->ttport = 0x0 [ 619.929616] xhci_hcd 0000:30:00.3: // Ding dong! ... [ 619.937709] usb 4-4: Device not responding to setup address. [ 619.937754] xhci_hcd 0000:30:00.3: // Ding dong! [ 619.937775] xhci_hcd 0000:30:00.3: // Ding dong! [ 619.937811] xhci_hcd 0000:30:00.3: Slot 7 output ctx = 0x0x00000000fffc2000 (dma) [ 619.937817] xhci_hcd 0000:30:00.3: Slot 7 input ctx = 0x0x00000000fff42000 (dma) [ 619.937823] xhci_hcd 0000:30:00.3: Set slot id 7 dcbaa entry 00000000dcd62c49 to 0xfffc2000 [ 619.938588] xhci_hcd 0000:30:00.3: xhci_get_isoc_frame_id: index 0, reg 0x833 start_frame_id 0x107, end_frame_id 0x485, start_frame 0x112 [ 619.938720] xhci_hcd 0000:30:00.3: Port change event, 4-4, id 8, portsc: 0xe0202a0 [ 619.938726] xhci_hcd 0000:30:00.3: handle_port_status: starting usb4 port polling. ... [ 620.141591] xhci_hcd 0000:30:00.3: Set root hub portnum to 8 [ 620.141596] xhci_hcd 0000:30:00.3: Set fake root hub portnum to 4 [ 620.141600] xhci_hcd 0000:30:00.3: udev->tt = 0000000000000000 [ 620.141604] xhci_hcd 0000:30:00.3: udev->ttport = 0x0 [ 620.141610] xhci_hcd 0000:30:00.3: // Ding dong! ... [ 620.149708] usb 4-4: Device not responding to setup address. [ 620.149752] xhci_hcd 0000:30:00.3: // Ding dong! [ 620.149774] xhci_hcd 0000:30:00.3: // Ding dong! [ 620.149810] xhci_hcd 0000:30:00.3: Slot 7 output ctx = 0x0x00000000fffc2000 (dma) [ 620.149816] xhci_hcd 0000:30:00.3: Slot 7 input ctx = 0x0x00000000fff42000 (dma) [ 620.149822] xhci_hcd 0000:30:00.3: Set slot id 7 dcbaa entry 00000000dcd62c49 to 0xfffc2000 ... [ 620.357571] usb 4-4: device not accepting address 19, error -71 [ 620.357587] xhci_hcd 0000:30:00.3: xhci_get_isoc_frame_id: index 0, reg 0x154b start_frame_id 0x2aa, end_frame_id 0x628, start_frame 0x2b5 ... [ 620.365636] xhci_hcd 0000:30:00.3: // Ding dong! [ 620.365655] xhci_hcd 0000:30:00.3: Bad real port. [ 620.365662] usb usb4-port4: attempt power cycle [ 620.365668] xhci_hcd 0000:30:00.3: set port power 4-4 OFF, portsc: 0xe021263 ... [ 620.573567] xhci_hcd 0000:30:00.3: set port power 4-4 ON, portsc: 0xe020080 ... -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
