Re: [PATCH 08/10] arm64: dts: qcom: sc8180x: Add USB MP controller and phys

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/25/24 20:04, Bjorn Andersson wrote:
From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>

The SC8180X platform comes with a multiport DWC3 controller with two
ports, each connected to a pair of HighSpeed and QMP SuperSpeed PHYs.

Describe these blocks.

Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sc8180x.dtsi | 146 ++++++++++++++++++++++++++++++++++
  1 file changed, 146 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 9ef3fa40e1d8..0950dc7adb20 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2511,6 +2511,34 @@ usb_sec_hsphy: phy@88e3000 {
  			status = "disabled";
  		};
+ usb_mp0_hsphy: phy@88e4000 {

Even though the register names are MPn, I think this is a bit confusing..

There's only one MP controller, so perhaps usb_mp_hsphy0?

[...]

+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;

PIPE_1_CLK

+			clock-names = "aux", "ref", "com_aux", "pipe";

This could be a vertical list

+
+			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
  		usb_sec_qmpphy: phy@88ee000 {
  			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
  			reg = <0 0x088ee000 0 0x18c>,
@@ -2662,6 +2738,76 @@ gem_noc: interconnect@9680000 {
  			qcom,bcm-voters = <&apps_bcm_voter>;
  		};
+ usb_mp: usb@a4f8800 {
+			compatible = "qcom,sc8180x-dwc3-mp", "qcom,dwc3";
+			reg = <0 0x0a4f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;

This is used by the secondary DWC3 (non-MP). Are you sure?

Actually, are we sure that these clocks are really supplying the DWC3s?

+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			interconnects = <&aggre1_noc MASTER_USB3_2 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_2 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MP_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 59 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 46 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 71 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 68 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event_1", "pwr_event_2",
+					  "hs_phy_1",	 "hs_phy_2",
+					  "dp_hs_phy_1", "dm_hs_phy_1",
+					  "dp_hs_phy_2", "dm_hs_phy_2",
+					  "ss_phy_1",	 "ss_phy_2";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			resets = <&gcc GCC_USB30_MP_BCR>;
+
+			status = "disabled";
+
+			usb_mp_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a400000 0 0xcd00>;
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x60 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;

sa8195-usb.dtsi lists a bunch more fluff:

snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x0>;
snps,is-utmi-l1-suspend;
snps,ssp-u3-u0-quirk;
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
snps,dis_u3_susphy_quirk;
snps,force-gen1;
maximum-speed = "super-speed";

the irq numbers look good

Konrad




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux