The USB multiport controller found in SC8180X is used to driver the
camera in the Lenovo Flex 5G, and a couple of additional USB ports on
the Primus AUX board.
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
Bjorn Andersson (10):
dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add sc8180x USB3 compatible
phy: qcom-qmp-usb: Add sc8180x USB UNIPHY
dt-bindings: clock: qcom: Add missing USB MP resets
clk: qcom: gcc-sc8180x: Add missing USB MP resets
dt-bindings: usb: qcom,dwc3: Add SC8180X compatibles
arm64: dts: qcom: sc8180x-pmics: Add second PMC8180 GPIO
arm64: dts: qcom: sc8180x: Align USB nodes with binding
arm64: dts: qcom: sc8180x: Add USB MP controller and phys
arm64: dts: qcom: sc8180x-primus: Enable the two MP USB ports
arm64: dts: qcom: sc8180x-lenovo-flex-5g: Enable USB multiport controller
.../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 3 +
.../devicetree/bindings/usb/qcom,dwc3.yaml | 29 ++++
.../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 32 ++++
arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 16 +-
arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 60 +++++++
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 175 +++++++++++++++++++--
drivers/clk/qcom/gcc-sc8180x.c | 4 +
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 3 +
include/dt-bindings/clock/qcom,gcc-sc8180x.h | 4 +
9 files changed, 312 insertions(+), 14 deletions(-)
---
base-commit: 3689b0ef08b70e4e03b82ebd37730a03a672853a
change-id: 20240524-sc8180x-usb-mp-4eb278df7ef1
Best regards,
--
Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
