Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/01/2024 10:43, Dmitry Baryshkov wrote:
On Mon, 15 Jan 2024 at 12:00, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:

On 13.01.2024 21:55, Dmitry Baryshkov wrote:
Define VBUS regulator and the Type-C handling block as present on the
Quacomm PMI632 PMIC.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/pmi632.dtsi | 30 ++++++++++++++++++++++++++++++
  1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
index 4eb79e0ce40a..d6832f0b7b80 100644
--- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -45,6 +45,36 @@ pmic@2 {
               #address-cells = <1>;
               #size-cells = <0>;

+             pmi632_vbus: usb-vbus-regulator@1100 {
+                     compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg";
+                     reg = <0x1100>;
+                     status = "disabled";
+             };
+
+             pmi632_typec: typec@1500 {
+                     compatible = "qcom,pmi632-typec";
+                     reg = <0x1500>;
+                     interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+                                  <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+                                  <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+                                  <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+                                  <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+                                  <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+                                  <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+                                  <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
This differs from the downstream irq types:

<0x2 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x2 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x3 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x6 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x7 IRQ_TYPE_EDGE_RISING>;

I must admit, I copied the IRQs from the pm8150b rather than from the
vendor kernel.

Bryan, any idea which set of flags is more correct?

My € says 1:1 with the downstream pmi632.dtsi

qcom,typec@1500 {
    reg = <0x1500 0x100>;
    interrupts = <0x2 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,
                 <0x2 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,
                 <0x2 0x15 0x2 IRQ_TYPE_EDGE_RISING>,
                 <0x2 0x15 0x3 IRQ_TYPE_EDGE_RISING>,
                 <0x2 0x15 0x4 IRQ_TYPE_EDGE_BOTH>,
                 <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>,
                 <0x2 0x15 0x6 IRQ_TYPE_EDGE_RISING>,
                 <0x2 0x15 0x7 IRQ_TYPE_EDGE_RISING>;

    interrupt-names = "typec-or-rid-detect-change",
                      "typec-vpd-detect",
                      "typec-cc-state-change",
                      "typec-vconn-oc",
                      "typec-vbus-change",
                      "typec-attach-detach",
                      "typec-legacy-cable-detect",
                      "typec-try-snk-src-detect";
};






[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux