[PATCH 09/13] phy: qcom: qmp-usbc: drop single lane handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All USB-C PHYs use 2 lanes for the USB. Drop single lane handling in
this driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 36 ++++++++++----------------------
 1 file changed, 11 insertions(+), 25 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index fd2439175cdf..21faed7f648a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -332,8 +332,6 @@ struct qmp_usbc_offsets {
 
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
-	int lanes;
-
 	const struct qmp_usbc_offsets *offsets;
 
 	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
@@ -444,8 +442,6 @@ static const struct qmp_usbc_offsets qmp_usbc_offsets_v3_qcm2290 = {
 };
 
 static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
-	.lanes			= 2,
-
 	.offsets		= &qmp_usbc_offsets_v3_qcm2290,
 
 	.serdes_tbl             = msm8998_usb3_serdes_tbl,
@@ -462,8 +458,6 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
 };
 
 static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
-	.lanes			= 2,
-
 	.offsets		= &qmp_usbc_offsets_v3_qcm2290,
 
 	.serdes_tbl		= qcm2290_usb3_serdes_tbl,
@@ -596,10 +590,8 @@ static int qmp_usbc_power_on(struct phy *phy)
 	qmp_usbc_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
 	qmp_usbc_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
 
-	if (cfg->lanes >= 2) {
-		qmp_usbc_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
-		qmp_usbc_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
-	}
+	qmp_usbc_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+	qmp_usbc_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
 
 	qmp_usbc_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
@@ -940,19 +932,15 @@ static int qmp_usbc_parse_dt_legacy(struct qmp_usbc *qmp, struct device_node *np
 	if (cfg->pcs_usb_offset)
 		qmp->pcs_usb = qmp->pcs + cfg->pcs_usb_offset;
 
-	if (cfg->lanes >= 2) {
-		qmp->tx2 = devm_of_iomap(dev, np, 3, NULL);
-		if (IS_ERR(qmp->tx2))
-			return PTR_ERR(qmp->tx2);
+	qmp->tx2 = devm_of_iomap(dev, np, 3, NULL);
+	if (IS_ERR(qmp->tx2))
+		return PTR_ERR(qmp->tx2);
 
-		qmp->rx2 = devm_of_iomap(dev, np, 4, NULL);
-		if (IS_ERR(qmp->rx2))
-			return PTR_ERR(qmp->rx2);
+	qmp->rx2 = devm_of_iomap(dev, np, 4, NULL);
+	if (IS_ERR(qmp->rx2))
+		return PTR_ERR(qmp->rx2);
 
-		qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
-	} else {
-		qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
-	}
+	qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
 
 	if (IS_ERR(qmp->pcs_misc)) {
 		dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
@@ -1004,10 +992,8 @@ static int qmp_usbc_parse_dt(struct qmp_usbc *qmp)
 	qmp->tx = base + offs->tx;
 	qmp->rx = base + offs->rx;
 
-	if (cfg->lanes >= 2) {
-		qmp->tx2 = base + offs->tx2;
-		qmp->rx2 = base + offs->rx2;
-	}
+	qmp->tx2 = base + offs->tx2;
+	qmp->rx2 = base + offs->rx2;
 
 	ret = qmp_usbc_clk_init(qmp);
 	if (ret)

-- 
2.39.2





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux