On 20/11/2023 18:06, Théo Lebrun wrote: > Hi, > > Suspend on the TI J7200 platform is broken currently. There are two > components that need to be patched so that they assume reset on > resume: (1) the TI wrapper cdns3-ti & (2) the HOST role of the > controller. > > About (1): the TI wrapper only did its hardware configuration at probe > time. Update so that it is done at resume on J7200 SoC. > > About (2): signal from cdns3-ti to cdns3 host to xHCI that the > controller resets on resume. This way we avoid the following warning: > > xhci-hcd xhci-hcd.1.auto: xHC error in resume, USBSTS 0x401, Reinit > > Strictly speaking (2) is not required to have working suspend on J7200; > its only goal is to silence this warning. > > Those patches have been tested on the TI J7200 EVM GP. No need to Yeah, but you forgot about dtbs_check testing. It's a step before testing on the device. It does not make sense to test a code if it causes build-time warnings. Best regards, Krzysztof
