On Fri, Oct 13, 2023 at 01:38:05PM +0200, Luca Weiss wrote: > Allow specifying data-lanes to reverse the SBU muxing orientation where > necessary by the hardware design. What situation in the hardware design makes this necessary. Please describe the problem. > > Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> > --- > .../devicetree/bindings/usb/fcs,fsa4480.yaml | 29 +++++++++++++++++++++- > 1 file changed, 28 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > index f6e7a5c1ff0b..86f6d633c2fb 100644 > --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > @@ -32,10 +32,37 @@ properties: > type: boolean > > port: > - $ref: /schemas/graph.yaml#/properties/port > + $ref: /schemas/graph.yaml#/$defs/port-base > description: > A port node to link the FSA4480 to a TypeC controller for the purpose of > handling altmode muxing and orientation switching. > + unevaluatedProperties: false > + > + properties: > + endpoint: > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: > + Specifies how the AUX+/- lines are connected to SBU1/2. Doesn't this depend on the connector orientation? Or it is both that and the lines can be swapped on the PCB? Seems like an abuse of data-lanes which already has a definition which is not about swapping + and - differential lanes. Rob
