From: Fabio Estevam <festevam@xxxxxxx> On a i.MX8QXP MEK board that has an NXP CBDTU02043 mux, there is no mode-switch support, only orientation switch. Make the 'mode-switch' property a non-required one. Signed-off-by: Fabio Estevam <festevam@xxxxxxx> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> --- Changes since v3: - Collected Conor's ack and sent it as standalone patch as the previous patch has already been applied. Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index b61dcf8b4aad..d3b2b666ec2a 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -51,7 +51,6 @@ required: - compatible - enable-gpios - select-gpios - - mode-switch - orientation-switch - port -- 2.34.1
