Re: [PATCH v2] usb: dwc3: core: Avoid resume dwc3 if already suspended in pm resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 10, 2023, wuliangfeng wrote:
> Hi Thinh,
> 
> Sorry for my late reply because the national day holiday.
> 
> 在 2023/10/3 2:18, Thinh Nguyen 写道:
> > On Fri, Sep 15, 2023, wuliangfeng wrote:
> > > Hi Thinh,
> > > 
> > > On 2023/9/12 8:08, Thinh Nguyen wrote:
> > > > Hi,
> > > > 
> > > > On Mon, Sep 11, 2023, William Wu wrote:
> > > > > If we enable PM runtime auto suspend for dwc3 on rockchip
> > > > > platforms (e.g. RK3562), it allows the dwc3 controller to
> > > > > enter runtime suspend if usb cable detached and power off
> > > > > the power domain of the controller. When system resume, if
> > > > > the dwc3 already in runtime suspended, it Shouldn't access
> > > > > the dwc3 registers in dwc3_resume() because its power domain
> > > > > maybe power off.
> > > > > 
> > > > > Test on RK3562 tablet, this patch can help to avoid kernel
> > > > > panic when accessing the dwc3 registers in dwc3_resume() if
> > > > > the dwc3 is in runtime suspended and it's power domain is
> > > > > power off.
> > > > The controller should be woken up before this step. Can you provide more
> > > > detail on what led to this?
> > > Yes, the power domain of the usb controller will be enabled by the framework
> > > of  the pm generic domain before dwc3 resume if the system enter suspend and
> > > exit suspend normally. However, in my test case,if the system fail to enter
> > > suspend because of some devices's problem, and then goto recovery process,
> > > the power domain of the usb controller will not be enable before dwc3
> > > resume.
> > Ok.
> > 
> > > > e.g. some questions:
> > > > Who handles the waking up of the controller? Is it the phy driver? Is
> > > > the phy driver not detecting a resume? Or did the resume fail? Does this
> > > > occur consistently?
> > > > 
> > > > Thanks,
> > > > Thinh
> > > This issue occurs occasionally on RK3562 EVB with Type-C USB, and enable
> > > autosuspend for dwc3 controller.
> > > 
> > > Here is the test steps:
> > > 
> > > 1. Power on the RK3562 EVB and the Type-C USB interface is in unconnected
> > > state.
> > > 
> > > 2. Makesure the dwc3 controller enter runtime suspend, and its power domain
> > > is disabled.
> > > 
> > > 3. Do system suspend/resume stress test.
> > > 
> > > 4. The issue occurs occasionally  with the following log:
> > > 
> > > [  251.681091][ T4331] PM: suspend entry (deep)
> > > [  251.778975][ T4331] Filesystems sync: 0.097 seconds
> > > [  251.779025][ T4331] Freezing user space processes ... (elapsed 0.005
> > > seconds) done.
> > > [  251.784819][ T4331] OOM killer disabled.
> > > [  251.784851][ T4331] Freezing remaining freezable tasks ... (elapsed 0.004
> > > seconds) done.
> > > [  251.792719][  T503] [SKWIFI DBG] skw_suspend: WoW: enabled, skw flags:
> > > 0x302
> > > [  251.803701][ T4331] PM: dpm_run_callback():
> > > platform_pm_suspend.cfi_jt+0x0/0x8 returns -16
> > > [  251.803779][   T75] PM: PM: Pending Wakeup Sources: alarmtimer.0.auto
> > > [  251.803789][ T4331] PM: Device alarmtimer.0.a
> > > [  251.803928][ T4331] PM: Some devices failed to suspend, or early wake
> > > event detected
> > > [  251.804141][   T75] [SKWIFI DBG] skw_resume: skw flags: 0x300
> > > [  251.804715][    C2] SError Interrupt on CPU2, code 0xbf000000 -- SError
> > > [  251.804725][    C2] CPU: 2 PID: 4331 Comm: binder:251_4 Tainted: G
> > > WC  E 5.10.157-android13-4-00006-g73f337804fbc-ab9881769 #1
> > > [  251.804732][    C2] Hardware name: Rockchip RK3562 RK817 TABLET LP4 Board
> > > (DT)
> > > [  251.804738][    C2] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
> > > [  251.804743][    C2] pc : el1_abort+0x40/0x68
> > > [  251.804748][    C2] lr : el1_abort+0x28/0x68
> > > 
> > > ......
> > > 
> > > [  251.804965][    C2] Kernel panic - not syncing: Asynchronous SError
> > > Interrupt
> > > [  251.804974][    C2] CPU: 2 PID: 4331 Comm: binder:251_4 Tainted: G
> > > WC  E 5.10.157-android13-4-00006-g73f337804fbc-ab9881769 #1
> > > [  251.804980][    C2] Hardware name: Rockchip RK3562 RK817 TABLET LP4 Board
> > > (DT)
> > > [  251.804984][    C2] Call trace:
> > > [  251.804990][    C2]  dump_backtrace.cfi_jt+0x0/0x8
> > > [  251.804995][    C2]  dump_stack_lvl+0xc0/0x13c
> > > [  251.805000][    C2]  panic+0x174/0x468
> > > [  251.805006][    C2]  arm64_serror_panic+0x1b0/0x200
> > > [  251.805010][    C2]  do_serror+0x184/0x1e4
> > > [  251.805016][    C2]  el1_error+0x94/0x118
> > > [  251.805020][    C2]  el1_abort+0x40/0x68
> > > [  251.805026][    C2]  el1_sync_handler+0x58/0x88
> > > [  251.805031][    C2]  el1_sync+0x8c/0x140
> > > [  251.805035][    C2]  dwc3_readl+0x30/0x1a0
> > > [  251.805040][    C2]  dwc3_phy_setup+0x38/0x510
> > > [  251.805045][    C2]  dwc3_core_init+0x68/0xcd4
> > > [  251.805051][    C2]  dwc3_core_init_for_resume+0x10c/0x25c
> > > [  251.805056][    C2]  dwc3_resume_common+0x44/0x3d0
> > > [  251.805061][    C2]  dwc3_resume+0x5c/0xb8
> > > [  251.805067][    C2]  dpm_run_callback+0x70/0x488
> > > [  251.805071][    C2]  device_resume+0x250/0x2f8
> > > [  251.805077][    C2]  dpm_resume+0x258/0x9dc
> > > [  251.805082][    C2]  suspend_devices_and_enter+0x850/0xcac
> > > 
> > > In this case, during suspend process, because the device alarmtimer failed
> > > to suspend, it break the system suspend in the funciton
> > > suspend_devices_and_enter(), and goto platform_recover() directly without
> > > enable the power domain of the controller, then trigger the Kernel panic in
> > > dwc3_resume().
> > > 
> > Thanks for the details.
> > 
> > > For a comparison, in the normal case, if the system enter suspend normally,
> > > and after the system wakeup, the power domain of the controller will be
> > > enable by the framework of  the pm generic domain before dwc3 resume.
> > > 
> > > The function call stack like this:
> > > 
> > > suspend_devices_and_enter -->
> > > 
> > >      suspend_enter -->
> > > 
> > >           dpm_resume_noirq --> dpm_noirq_resume_devices -->
> > > device_resume_noirq --> genpd_resume_noirq --> rockchip_pd_power (enable
> > > the power domain of the controller)
> > > 
> > >      dpm_resume_end -->
> > > 
> > >           dpm_resume --> device_resume --> dpm_run_callback --> dwc3_resume
> > > (access the controller safely)
> > > 
> > >           dpm_complete --> genpd_complete --> genpd_queue_power_off_work
> > > 
> > > suspend_finish --> suspend_thaw_processes --> genpd_power_off_work_fn -->
> > > (diable the power domain of the controller to maintain the original runtime
> > > suspend state)
> > > 
> > At what step do we restore the power domain when this happen? Looks like
> > there's a missing step in the suspend failure recovery to recover the
> > power domain. What we're doing here seems more like a workaround to
> > that, which unfortunately makes the code logic looks unclear IMO.
> 
> When then suspend successful, the power framework call dpm_resume_noirq() to
> enable on the power domain and then call dpm_complete() ->
> genpd_power_off_work_fn() to restore the original power domain state.
> 
> When the suspend failure happens,it seems that nobody recover the power
> domain in the power framework and rockchip platform pm_domains driver.
> 
> > 
> > Can this be fixed in the lower layer?
> 
> For the time being, I haven't found a solution in the lower layer to fix
> this issue. I have to disable the dwc3 runtime feature on RK3562 GKI
> project.
> 

While this patch may avoid the kernel panic, but it's not fixing the
real issue here. I think we need to look into enhancing the suspend
failure recovery instead.

Thanks,
Thinh




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux