On 15/09/2023 07:50, Javier Carrasco wrote:
The TPS6598x PD controller provides an active-high hardware reset input that reinitializes all device settings. If it is not grounded by design, the driver must be able to de-assert it in order to initialize the device. The PD controller is not ready for registration right after the reset de-assertion and a delay must be introduced in that case. According to TI, the delay can reach up to 1000 ms [1], which is in line with the experimental results obtained with a TPS65987D. Add a GPIO descriptor for the reset signal and basic reset management for initialization and suspend/resume. [1] https://e2e.ti.com/support/power-management-group/power-management/ f/power-management-forum/1269856/tps65987d-tps65987d-reset-de-assert- to-normal-operation/4809389#4809389 Signed-off-by: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
