The TPS6598x driver supports an optional high-level reset GPIO.
Document the new property and add it to the example.
Signed-off-by: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
index 5497a60cddbc..b1a621e06127 100644
--- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -23,6 +23,10 @@ properties:
reg:
maxItems: 1
+ reset-gpios:
+ description: GPIO used for the HRESET pin.
+ maxItems: 1
+
wakeup-source: true
interrupts:
@@ -40,6 +44,7 @@ additionalProperties: true
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
@@ -56,6 +61,7 @@ examples:
pinctrl-names = "default";
pinctrl-0 = <&typec_pins>;
+ reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
typec_con: connector {
compatible = "usb-c-connector";
--
2.39.2
