On 8/25/2023 4:08 PM, Krzysztof Kozlowski wrote:
On 25/08/2023 11:35, Nitheesh Sekar wrote:Add USB phy and controller nodes. Co-developed-by: Amandeep Singh <quic_amansing@xxxxxxxxxxx> Signed-off-by: Amandeep Singh <quic_amansing@xxxxxxxxxxx> Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 54 +++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 9f13d2dcdfd5..ff477923a823 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -238,6 +238,60 @@ status = "disabled"; }; }; + + usbphy0: phy@5b000 { + compatible = "qcom,ipq5018-usb-hsphy"; + reg = <0x0005b000 0x120>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb: usb2@8a00000 {usb@ Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Sure, will update. Regards, Nitheesh
