[PATCH 0/5] Enable IPQ5018 USB2 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series adds the relevant phy and controller
DT configurations for enabling USB2 host mode support
on IPQ5018.

Tested with a USB Mass storage device.

Nitheesh Sekar (5):
  dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
  dt-bindings: usb: dwc3: Add IPQ5018 compatible
  phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
  arm64: dts: qcom: ipq5018: Add USB related nodes
  arm64: dts: qcom: ipq5018: Enable USB

 .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml  |  4 +-
 .../devicetree/bindings/usb/qcom,dwc3.yaml    |  3 +
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 12 ++++
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 54 +++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-m31.c           | 60 +++++++++++++++++++
 5 files changed, 132 insertions(+), 1 deletion(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux