Re: [PATCH 1/4] dt-bindings: soc: qcom: qcom,pmic-glink: add a gpio used to determine the Type-C port plug orientation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/08/2023 18:03, Bjorn Andersson wrote:
On Fri, Aug 04, 2023 at 03:50:07PM +0200, Neil Armstrong wrote:
On SM8450 and SM8550 based platforms, the Type-C plug orientation is given on a
GPIO line set by the PMIC.

Document this optional Type-C connector property, and take the
assumption an active level represents an inverted/flipped orientation.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
  .../devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml  | 18 ++++++++++++++++++
  1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
index bceb479f74c5..1b0a00b19a54 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -35,6 +35,11 @@ properties:
    '#size-cells':
      const: 0
+ orientation-gpios:
+    description: An input gpio for Type-C connector orientation, used to detect orientation
+      of the Type-C connector. GPIO active level means "CC2" or Reversed/Flipped orientation.

This is a per-connector/port property, as such be part of the connector
sub nodes rather than as a property of the shared pmic_glink entity.

This has been rejected by Rob, Dmitry & Krzysztof in:
https://lore.kernel.org/all/0fbf55e7-2140-751d-5347-f907a46ef78c@xxxxxxxxxx/
&
https://lore.kernel.org/all/20230608154751.GA2750742-robh@xxxxxxxxxx/

Indeed the "GPIO" is not part of the physical USB-C connector, but a property,
and it's not part of the PMIC GLINK firmware either, so ?

The PMIC function which generates this signal is handled by the PMIC GLINK
firmware, so this representation is the most accurate.

Neil


Regards,
Bjorn

+    maxItems: 1
+
  patternProperties:
    '^connector@\d$':
      $ref: /schemas/connector/usb-connector.yaml#
@@ -44,6 +49,19 @@ patternProperties:
  required:
    - compatible
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,sm8450-pmic-glink
+                - qcom,sm8550-pmic-glink
+    then:
+      properties:
+        orientation-gpios: false
+
  additionalProperties: false
examples:

--
2.34.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux