On 09/08/2023 23:29, Luke Lu wrote:
Device connected to usb otg port of GXL-based boards can not be
recognised after resumption, doesn't recover even if disconnect and
reconnect the device. dmesg shows it disconnects during resumption.
[ 41.492911] usb 1-2: USB disconnect, device number 3
[ 41.499346] usb 1-2: unregistering device
[ 41.511939] usb 1-2: unregistering interface 1-2:1.0
Calling usb_post_init() will fix this issue, and it's tested and
verified on libretech's aml-s905x-cc board.
Cc: stable@xxxxxxxxxxxxxxx # v5.8+
Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Signed-off-by: Luke Lu <luke.lu@libre.computer>
---
Note here, the commmit of Fixes tag is the first patch which bring
suspend/resume function, so let's use it as the fix tag.
As commit 5b0ba0caaf3a: (usb: dwc3: meson-g12a: refactor usb init)"
introduced the use_post_init() function, and this patch will explicitly
depend on it, so let's set kernel version higher or equal to v5.8.
Changes since v1:
- add Fixes tag and Cc stable tree
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index e99c7489dba0..2c07c038b584 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -926,6 +926,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
return ret;
}
+ if (priv->drvdata->usb_post_init) {
+ ret = priv->drvdata->usb_post_init(priv);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
Acked-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
