Re: [PATCH v3 2/2] dt-bindings: usb: dwc3: Add Realtek DHC RTD SoC DWC3 USB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 10, 2023 at 01:54:35PM +0800, Stanley Chang wrote:
> Document the DWC3 USB bindings for Realtek SoCs.
> 
> Signed-off-by: Stanley Chang <stanley_chang@xxxxxxxxxxx>
> ---
> v2 to v3 change:
>     Add description for reg
>     Remove property for realtek,unlink-usb3-port.
>     Remove property for realtek,disable-usb3-phy.
>     Use the maximum-speed instead of the above two properties.
> v1 to v2 change:
>     Revise the subject.
>     Rename the file.
>     Fix dtschema warnings.
>     Remove the property realtek,enable-l4icg.
>     Drop status.
> ---
>  .../bindings/usb/realtek,rtd-dwc3.yaml        | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml b/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml
> new file mode 100644
> index 000000000000..cc66adc4b9da
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2023 Realtek Semiconductor Corporation
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/realtek,rtd-dwc3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek DWC3 USB SoC Controller Glue
> +
> +maintainers:
> +  - Stanley Chang <stanley_chang@xxxxxxxxxxx>
> +
> +description:
> +  The Realtek DHC SoC embeds a DWC3 USB IP Core configured for USB 2.0
> +  and USB 3.0 in host or dual-role mode.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - realtek,rtd1295-dwc3
> +          - realtek,rtd1315e-dwc3
> +          - realtek,rtd1319-dwc3
> +          - realtek,rtd1319d-dwc3
> +          - realtek,rtd1395-dwc3
> +          - realtek,rtd1619-dwc3
> +          - realtek,rtd1619b-dwc3
> +      - const: realtek,rtd-dwc3
> +
> +  reg:
> +    description: Offset and length of register set for wrapper of dwc3 core.
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
> +  ranges: true
> +
> +patternProperties:
> +  "^usb@[0-9a-f]+$":
> +    $ref: snps,dwc3.yaml#
> +    description: Required child node
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    usb@98013e00 {
> +        compatible = "realtek,rtd1319d-dwc3", "realtek,rtd-dwc3";
> +        reg = <0x98013e00 0x200>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
> +        maximum-speed = "high-speed";

This should be a warning (the bot was having problems) as it is not 
defined for this node. It belongs in the child node as you also have, so 
drop it.

> +
> +        usb@98050000 {
> +            compatible = "snps,dwc3";
> +            reg = <0x98050000 0x9000>;
> +            interrupts = <0 94 4>;
> +            phys = <&usb2phy &usb3phy>;
> +            phy-names = "usb2-phy", "usb3-phy";
> +            dr_mode = "otg";
> +            usb-role-switch;
> +            role-switch-default-mode = "host";
> +            snps,dis_u2_susphy_quirk;
> +            snps,parkmode-disable-ss-quirk;
> +            snps,parkmode-disable-hs-quirk;
> +            maximum-speed = "high-speed";
> +        };
> +    };
> -- 
> 2.34.1
> 



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux