From: Ladislav Michl <ladis@xxxxxxxxxxxxxx> Although valid USB clock divider will be calculated for all valid Octeon core frequencies, make code formally correct limiting divider not to be greater that 7 so it fits into H_CLKDIV_SEL field. Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx> Reported-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx> Closes: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230808/testrun/18882876/suite/build/test/gcc-8-cavium_octeon_defconfig/log --- Greg, if you want to resent whole serie, just drop me a note. Otherwise, this patch is meant to be applied on to of it. Thank you. drivers/usb/dwc3/dwc3-octeon.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-octeon.c b/drivers/usb/dwc3/dwc3-octeon.c index 6f47262a117a..73bdcebf465c 100644 --- a/drivers/usb/dwc3/dwc3-octeon.c +++ b/drivers/usb/dwc3/dwc3-octeon.c @@ -251,11 +251,11 @@ static int dwc3_octeon_get_divider(void) while (div < ARRAY_SIZE(clk_div)) { uint64_t rate = octeon_get_io_clock_rate() / clk_div[div]; if (rate <= 300000000 && rate >= 150000000) - break; + return div; div++; } - return div; + return -EINVAL; } static int dwc3_octeon_setup(struct dwc3_octeon *octeon, @@ -289,6 +289,10 @@ static int dwc3_octeon_setup(struct dwc3_octeon *octeon, /* Step 4b: Select controller clock frequency. */ div = dwc3_octeon_get_divider(); + if (div < 0) { + dev_err(dev, "clock divider invalid\n"); + return div; + } val = dwc3_octeon_readq(uctl_ctl_reg); val &= ~USBDRD_UCTL_CTL_H_CLKDIV_SEL; val |= FIELD_PREP(USBDRD_UCTL_CTL_H_CLKDIV_SEL, div); -- 2.39.2
