From: Sanjay R Mehta <sanju.mehta@xxxxxxx> Previously, on unplug events, the TMU mode was disabled first followed by the Time Synchronization Handshake, irrespective of whether the tb_switch_tmu_rate_write() API was successful or not. However, this caused a problem with Thunderbolt 3 (TBT3) devices, as the TSPacketInterval bits were always enabled by default, leading the host router to assume that the device router's TMU was already enabled and preventing it from initiating the Time Synchronization Handshake. As a result, TBT3 monitors experienced display flickering from the second hot plug onwards. To address this issue, we have modified the code to only disable the Time Synchronization Handshake during TMU disable if the tb_switch_tmu_rate_write() function is successful. This ensures that the TBT3 devices function correctly and eliminates the display flickering issue. Signed-off-by: Sanath S <Sanath.S@xxxxxxx> Signed-off-by: Sanjay R Mehta <sanju.mehta@xxxxxxx> --- drivers/thunderbolt/tmu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/thunderbolt/tmu.c b/drivers/thunderbolt/tmu.c index 626aca3..49146f9 100644 --- a/drivers/thunderbolt/tmu.c +++ b/drivers/thunderbolt/tmu.c @@ -415,7 +415,9 @@ int tb_switch_tmu_disable(struct tb_switch *sw) * uni-directional mode and we don't want to change it's TMU * mode. */ - tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF); + ret = tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF); + if (ret) + return ret; tb_port_tmu_time_sync_disable(up); ret = tb_port_tmu_time_sync_disable(down); -- 2.7.4
