Re: [PATCH v9 06/10] usb: dwc3: qcom: Add support to read IRQ's related to multiport

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/3/2023 12:29 AM, Krishna Kurapati PSSNV wrote:


On 6/27/2023 8:01 PM, Johan Hovold wrote:
On Wed, Jun 21, 2023 at 10:06:24AM +0530, Krishna Kurapati wrote:
Add support to read Multiport IRQ's related to quad port controller
of SA8295 Device.

Please use a more descriptive summary and commit message; "read" is to
vague. You're looking up interrupts from the devicetree. Also this
should not just be about SA8295.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
  drivers/usb/dwc3/dwc3-qcom.c | 108 +++++++++++++++++++++++++++++------
  1 file changed, 91 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 3de43df6bbe8..3ab48a6925fe 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -74,9 +74,9 @@ struct dwc3_qcom {
      struct reset_control    *resets;
      int            hs_phy_irq;
-    int            dp_hs_phy_irq;
-    int            dm_hs_phy_irq;
-    int            ss_phy_irq;
+    int            dp_hs_phy_irq[4];
+    int            dm_hs_phy_irq[4];
+    int            ss_phy_irq[2];

As has already been pointed out, you should use a define for these. And
you already have DWC3_MAX_PORTS.

The driver should not be hardcoding the fact that there are only two SS
ports on this particular SoC that you're interested in.

      enum usb_device_speed    usb2_speed;
      struct extcon_dev    *edev;

@@ -535,6 +535,80 @@ static int dwc3_qcom_get_irq(struct platform_device *pdev,
      return ret;
  }
+static int dwc3_qcom_setup_mp_irq(struct platform_device *pdev)
+{
+    struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+    char irq_name[15];
+    int irq;
+    int ret;
+    int i;
+
+    for (i = 0; i < 4; i++) {

DWC3_MAX_PORTS here too and similar below.

+        if (qcom->dp_hs_phy_irq[i])
+            continue;

This is not very nice. You should try to integrate the current lookup
code as I told you to do with the PHY lookups. That is, use a single
loop for all HS/SS IRQs, and pick the legacy name if the number of ports
is 1.

Of course, you added the xhci capability parsing to the core driver so
that information is not yet available, but you need it in the glue
driver also...

As I mentioned earlier, you can infer the number of ports from the
interrupt names. Alternatively, you can infer it from the compatible
string. In any case, you should not need to ways to determine the same
information in the glue driver, then in the core part, and then yet
again in the xhci driver...

Hi Johan,

 The reason why I didn't integrate this with the original function was the ACPI stuff. The MP devices have no ACPI variant. And I think for clarity sake its best to keep these two functions separated.

Regards,
Krishna,

+
+        sprintf(irq_name, "dp%d_hs_phy_irq", i+1);

Spaces around binary operators. Does not checkpatch warn about that?

+        irq = dwc3_qcom_get_irq(pdev, irq_name, -1);
+        if (irq > 0) {
+            irq_set_status_flags(irq, IRQ_NOAUTOEN);
+            ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+                    qcom_dwc3_resume_irq,
+                    IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+                    irq_name, qcom);
+            if (ret) {
+                dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret);
+                return ret;
+            }
+        }
+
+        qcom->dp_hs_phy_irq[i] = irq;
+    }
+
+    for (i = 0; i < 4; i++) {
+        if (qcom->dm_hs_phy_irq[i])
+            continue;
+
+        sprintf(irq_name, "dm%d_hs_phy_irq", i+1);
+        irq = dwc3_qcom_get_irq(pdev, irq_name, -1);
+        if (irq > 0) {
+            irq_set_status_flags(irq, IRQ_NOAUTOEN);
+            ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+                    qcom_dwc3_resume_irq,
+                    IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+                    irq_name, qcom);
+            if (ret) {
+                dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret);
+                return ret;
+            }
+        }
+
+        qcom->dm_hs_phy_irq[i] = irq;
+    }
+
+    for (i = 0; i < 2; i++) {
+        if (qcom->ss_phy_irq[i])
+            continue;
+
+        sprintf(irq_name, "ss%d_phy_irq", i+1);
+        irq = dwc3_qcom_get_irq(pdev, irq_name, -1);
+        if (irq > 0) {
+            irq_set_status_flags(irq, IRQ_NOAUTOEN);
+            ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+                    qcom_dwc3_resume_irq,
+                    IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+                    irq_name, qcom);
+            if (ret) {
+                dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret);
+                return ret;
+            }
+        }
+
+        qcom->ss_phy_irq[i] = irq;
+    }

So the above should all be merged in either a single helper looking up
all the interrupts for a port and resused for the non-MP case.

I agree, Will merge all under some common helper function.


Hi Johan,

One more thought. To make one single function read all the interrupts (Single port or multi port), we need to provide proper inputs to get_irq call (i.e., "dp_hs_phy_irq" or dp_hs_phy_irq_X" and for that we need to know if device is multiport capable or not.

Either of the following ways needs to be done:

1. Try getting all interrupts (MP or single port) and accordingly save it in qcom struct like done in this patch in which case setup_irq and get_mp_irq being seperated is the best option and we don't need to bother about whether we are MP capable or not.

2. Else, we need to find out if we are MP capable and read number of ports and accordingly get the IRQ's which will just complicate the code because of_platform_populate is done after setup_irq. Even if I move setup_irq to after of_platform_populate, what dwc3 probe was deferred or failed, we would not know what IRQ's to read.

3. If we want to know whether we are MP capable or not in dwc3-qcom even before of_platform_populate, we need to find out a way to get port info which will just be duplication of code or re-implementation of code done in core.c [1].

4. One more option would be to defer qcom probe if dwc3 probe is not done and move setup_irq to be called after of_platform_populate. This way we can be sure we are not dereferencing dwc3->drvdata without knowing if it is NULL or not. Since qcom probe happened, we are sure dwc3 probe too happened. We would know if we are MP capable or not while setting up IRQ and we can read IRQ's appropriately.

Logically, dwc3-qcom is nothing without dwc3 core getting probed and becoming active. So it would be better IMO to defer qcom probe if dwc3 probe doesn't happen and that way even the layering violations too would go away. I hope this idea appeals to the issues we are dealing with.

[1]: https://lore.kernel.org/all/20230621043628.21485-4-quic_kriskura@xxxxxxxxxxx/

Adding Bjorn and Konrad as well to know their thoughts on Point-4.

Regards,
Krishna,


+    return 0;
+}
+
  static int dwc3_qcom_setup_irq(struct platform_device *pdev)
  {
      struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
@@ -570,7 +644,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
              dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
              return ret;
          }
-        qcom->dp_hs_phy_irq = irq;
+        qcom->dp_hs_phy_irq[0] = irq;
      }
      irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
@@ -585,7 +659,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
              dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
              return ret;
          }
-        qcom->dm_hs_phy_irq = irq;
+        qcom->dm_hs_phy_irq[0] = irq;
      }
      irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
@@ -600,10 +674,10 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
              dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
              return ret;
          }
-        qcom->ss_phy_irq = irq;
+        qcom->ss_phy_irq[0] = irq;
      }
-    return 0;
+    return dwc3_qcom_setup_mp_irq(pdev);;

Stray ;

  }
  static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)

Johan



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux