For mxs PHY, if there is a vbus but the bus is not enumerated, we need
to force the dp/dm as SE0 from the controller side. If not, there is
possible USB wakeup due to unstable dp/dm, since there is possible no
pull on dp/dm, such as there is a USB charger on the port.
Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
---
drivers/usb/phy/phy-mxs-usb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index f484c79efa6c..619411aab86c 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -395,6 +395,7 @@ static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
{
bool vbus_is_on = false;
+ enum usb_phy_events last_event = mxs_phy->phy.last_event;
/* If the SoCs don't need to disconnect line without vbus, quit */
if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
@@ -406,7 +407,8 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
- if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
+ if (on && ((!vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
+ || (last_event == USB_EVENT_VBUS)))
__mxs_phy_disconnect_line(mxs_phy, true);
else
__mxs_phy_disconnect_line(mxs_phy, false);
--
2.34.1
