The function mxs_phy_is_otg_host() will return true if OTG_ID_VALUE is
0 at USBPHY_CTRL register. However, OTG_ID_VALUE will not reflect the real
state if the ID pin is float, such as Host-only or Type-C cases. The value
of OTG_ID_VALUE is always 1 which means device mode.
This patch will fix the issue by judging the current mode based on
last_event. The controller will update last_event in time.
Fixes: 7b09e67639d6 ("usb: phy: mxs: refine mxs_phy_disconnect_line")
Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
---
drivers/usb/phy/phy-mxs-usb.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 036bb58a3a71..f484c79efa6c 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -388,14 +388,8 @@ static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
{
- void __iomem *base = mxs_phy->phy.io_priv;
- u32 phyctrl = readl(base + HW_USBPHY_CTRL);
-
- if (IS_ENABLED(CONFIG_USB_OTG) &&
- !(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE))
- return true;
-
- return false;
+ return IS_ENABLED(CONFIG_USB_OTG) &&
+ mxs_phy->phy.last_event == USB_EVENT_ID;
}
static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
--
2.34.1
