On Wed, 10 May 2023, Hans de Goede wrote: > led_blink_set[_oneshot]()'s delay_on and delay_off function parameters > are pass by reference, so that hw-blink implementations can report > back the actual achieved delays when the values have been rounded > to something the hw supports. > > This is really only interesting for the sysfs API / the timer trigger. > Other triggers don't really care about this and none of the callers of > led_trigger_blink[_oneshot]() do anything with the returned delay values. > > Change the led_trigger_blink[_oneshot]() delay parameters to pass-by-value, > there are 2 reasons for this: > > 1. led_cdev->blink_set() may sleep, while led_trigger_blink() may not. > So on hw where led_cdev->blink_set() sleeps the call needs to be deferred > to a workqueue, in which case the actual achieved delays are unknown > (this is a preparation patch for the deferring). > > 2. Since the callers don't care about the actual achieved delays, allowing > callers to directly pass a value leads to simpler code for most callers. > > Reviewed-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx> > Tested-by: Yauhen Kharuzhy <jekhor@xxxxxxxxx> > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > drivers/leds/led-triggers.c | 16 ++++++++-------- > drivers/leds/trigger/ledtrig-disk.c | 9 +++------ > drivers/leds/trigger/ledtrig-mtd.c | 8 ++------ > drivers/net/arcnet/arcnet.c | 8 ++------ > drivers/power/supply/power_supply_leds.c | 5 +---- > drivers/usb/common/led.c | 4 +--- > include/linux/leds.h | 16 ++++++++-------- > net/mac80211/led.c | 2 +- > net/mac80211/led.h | 8 ++------ > net/netfilter/xt_LED.c | 3 +-- > 10 files changed, 29 insertions(+), 50 deletions(-) Applied, thanks -- Lee Jones [李琼斯]
