Re: [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 27, 2023 at 08:50:39PM +0300, Dmitry Baryshkov wrote:
> On 26/04/2023 12:51, Varadarajan Narayanan wrote:
> >On Mon, Apr 24, 2023 at 02:17:06PM +0300, Dmitry Baryshkov wrote:
> >>On Mon, 24 Apr 2023 at 12:04, Varadarajan Narayanan
> >><quic_varada@xxxxxxxxxxx> wrote:
> >>>
> >>>On Sat, Apr 22, 2023 at 12:07:01AM +0300, Dmitry Baryshkov wrote:
> >>>>On 05/04/2023 14:41, Varadarajan Narayanan wrote:
> >>>>>Add USB phy and controller related nodes
> >>>>>
> >>>>>Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> >>>>>---
> >>>>>  Changes in v8:
> >>>>>     - Change clocks order to match the bindings
> >>>>>  Changes in v7:
> >>>>>     - Change com_aux -> cfg_ahb
> >>>>>  Changes in v6:
> >>>>>     - Introduce fixed regulators for the phy
> >>>>>     - Resolved all 'make dtbs_check' messages
> >>>>>
> >>>>>  Changes in v5:
> >>>>>     - Fix additional comments
> >>>>>     - Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> >>>>>     - 'make dtbs_check' giving the following messages since
> >>>>>       ipq9574 doesn't have power domains. Hope this is ok
> >>>>>
> >>>>>             /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
> >>>>>             From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> >>>>>             /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
> >>>>>             From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> >>>>>
> >>>>>  Changes in v4:
> >>>>>     - Use newer bindings without subnodes
> >>>>>     - Fix coding style issues
> >>>>>
> >>>>>  Changes in v3:
> >>>>>     - Insert the nodes at proper location
> >>>>>
> >>>>>  Changes in v2:
> >>>>>     - Fixed issues flagged by Krzysztof
> >>>>>     - Fix issues reported by make dtbs_check
> >>>>>     - Remove NOC related clocks (to be added with proper
> >>>>>       interconnect support)
> >>>>>---
> >>>>>  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 ++++++++++++++++++++++++++++++++++
> >>>>>  1 file changed, 120 insertions(+)
> >>>>>
> >>>>>diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >>>>>index 43a3dbe..1242382 100644
> >>>>>--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >>>>>+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >>>>>@@ -150,6 +150,33 @@
> >>>>>             method = "smc";
> >>>>>     };
> >>>>>+    reg_usb_3p3: s3300 {
> >>>>
> >>>>The node names do not look generic enough. Please take a look at other
> >>>>platforms.
> >>>
> >>>Please see below.
> >>>
> >>>>>+            compatible = "regulator-fixed";
> >>>>>+            regulator-min-microvolt = <3300000>;
> >>>>>+            regulator-max-microvolt = <3300000>;
> >>>>>+            regulator-boot-on;
> >>>>>+            regulator-always-on;
> >>>>>+            regulator-name = "usb-phy-vdd-dummy";
> >>>>
> >>>>This also doesn't look correct. This regulator should not just fill the gap.
> >>>>Does it represent a generic voltage network on the board?
> >>>>
> >>>>Please do not add 'dummy' voltage regulators if there is no real voltage
> >>>>wire.
> >>>
> >>>These are real voltage wires. I used dummy since they are
> >>>always-on and cannot be increased/decreased (i.e. fixed).
> >>>Would something along the following lines be appropriate?
> >>
> >>Still not fully correct. Please use regulator name that corresponds to
> >>the power grid on the board schematics. I don't think that you have a
> >>separate power grids for USB PHY.
> >>
> >>>
> >>>         vreg_ae10_3p3: s3300 {
> >>
> >>Naming suggests that these voltages are generated by some PMIC. Is
> >>this correct? If so, please describe the PMIC instead.
> >
> >SS PHY needs two supplies and HS PHY needs three supplies. 3.3V
> >and 0.925V are from fixed DC - DC regulators and 1.8V is
> >generated from MP5496 PMIC. Would the following node definitions
> >be ok?
> >
> >usb_hs_vreg0: usb_hs_vreg0 {
> >	compatible = "regulator-fixed";
> >	regulator-min-microvolt = <3300000>;
> >	regulator-max-microvolt = <3300000>;
> >	regulator-boot-on;
> >	regulator-always-on;
> >	regulator-name = "usb-phy-vdd";
> >};
> >
> >usb_hs_vreg1: usb_hs_vreg1 {
> >	compatible = "regulator-fixed";
> >	regulator-min-microvolt = <925000>;
> >	regulator-max-microvolt = <925000>;
> >	regulator-boot-on;
> >	regulator-always-on;
> >	regulator-name = "usb-phy";
> >};
>
> Again. The voltage rails on the board are not USB-specific, are they? So why
> are you declaring usb-phy regulators? Would another consumer of 3.3V rail
> use the same usb-phy-vdd regulator?

Ok. Will rename them as follows

	usb_hs_vreg0 -> fixed_3p3
	usb_hs_vreg1 -> fixed_0p925

	regulator-name = "usb-phy-vdd";	-> fixed_3p3
	regulator-name = "usb-phy";	-> fixed_0p925

> >&rpm_requests {
> >	regulators {
> >		compatible = "qcom,rpm-mp5496-regulators";
> >		.
> >		.
> >		.
> >		ipq9574_l2: l2 {
>
> mp5496_l2

Ok.

Thanks
Varada

> >			regulator-min-microvolt = <1800000>;
> >			regulator-max-microvolt = <1800000>;
> >			regulator-boot-on;
> >			regulator-always-on;
> >		};
> >	};
> >};
> >
> >Thanks
> >Varada
> >
> >>>                 compatible = "regulator-fixed";
> >>>                 regulator-min-microvolt = <3300000>;
> >>>                 regulator-max-microvolt = <3300000>;
> >>>                 regulator-boot-on;
> >>>                 regulator-always-on;
> >>>                 regulator-name = "usb-phy-vdd";
> >>>         };
> >>>
> >>>         vreg_ad8_1p8: s1800 {
> >>>                 compatible = "regulator-fixed";
> >>>                 regulator-min-microvolt = <1800000>;
> >>>                 regulator-max-microvolt = <1800000>;
> >>>                 regulator-boot-on;
> >>>                 regulator-always-on;
> >>>                 regulator-name = "usb-phy-pll";
> >>>         };
> >>>
> >>>         vreg_ad9_0p925: s0925 {
> >>>                 compatible = "regulator-fixed";
> >>>                 regulator-min-microvolt = <925000>;
> >>>                 regulator-max-microvolt = <925000>;
> >>>                 regulator-boot-on;
> >>>                 regulator-always-on;
> >>>                 regulator-name = "usb-phy";
> >>>         };
> >>>
> >>>Thanks
> >>>Varada
> >>>
> >>>>>+    };
> >>>>>+
> >>>>>+    reg_usb_1p8: s1800 {
> >>>>>+            compatible = "regulator-fixed";
> >>>>>+            regulator-min-microvolt = <1800000>;
> >>>>>+            regulator-max-microvolt = <1800000>;
> >>>>>+            regulator-boot-on;
> >>>>>+            regulator-always-on;
> >>>>>+            regulator-name = "usb-phy-pll-dummy";
> >>>>>+    };
> >>>>>+
> >>>>>+    reg_usb_0p925: s0925 {
> >>>>>+            compatible = "regulator-fixed";
> >>>>>+            regulator-min-microvolt = <925000>;
> >>>>>+            regulator-max-microvolt = <925000>;
> >>>>>+            regulator-boot-on;
> >>>>>+            regulator-always-on;
> >>>>>+            regulator-name = "usb-phy-dummy";
> >>>>>+    };
> >>>>>+
> >>>>>     reserved-memory {
> >>>>>             #address-cells = <2>;
> >>>>>             #size-cells = <2>;
> >>>>>@@ -179,6 +206,52 @@
> >>>>>             #size-cells = <1>;
> >>>>>             ranges = <0 0 0 0xffffffff>;
> >>>>>+            usb_0_qusbphy: phy@7b000 {
> >>>>>+                    compatible = "qcom,ipq9574-qusb2-phy";
> >>>>>+                    reg = <0x0007b000 0x180>;
> >>>>>+                    #phy-cells = <0>;
> >>>>>+
> >>>>>+                    clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> >>>>>+                             <&xo_board_clk>;
> >>>>>+                    clock-names = "cfg_ahb",
> >>>>>+                                  "ref";
> >>>>>+
> >>>>>+                    vdd-supply = <&reg_usb_0p925>;
> >>>>>+                    vdda-pll-supply = <&reg_usb_1p8>;
> >>>>>+                    vdda-phy-dpdm-supply = <&reg_usb_3p3>;
> >>>>>+
> >>>>>+                    resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> >>>>>+                    status = "disabled";
> >>>>>+            };
> >>>>>+
> >>>>>+            usb_0_qmpphy: phy@7d000 {
> >>>>>+                    compatible = "qcom,ipq9574-qmp-usb3-phy";
> >>>>>+                    reg = <0x0007d000 0xa00>;
> >>>>>+                    #phy-cells = <0>;
> >>>>>+
> >>>>>+                    clocks = <&gcc GCC_USB0_AUX_CLK>,
> >>>>>+                             <&xo_board_clk>,
> >>>>>+                             <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> >>>>>+                             <&gcc GCC_USB0_PIPE_CLK>;
> >>>>>+                    clock-names = "aux",
> >>>>>+                                  "ref",
> >>>>>+                                  "cfg_ahb",
> >>>>>+                                  "pipe";
> >>>>>+
> >>>>>+                    resets = <&gcc GCC_USB0_PHY_BCR>,
> >>>>>+                             <&gcc GCC_USB3PHY_0_PHY_BCR>;
> >>>>>+                    reset-names = "phy",
> >>>>>+                                  "phy_phy";
> >>>>>+
> >>>>>+                    vdda-pll-supply = <&reg_usb_1p8>;
> >>>>>+                    vdda-phy-supply = <&reg_usb_0p925>;
> >>>>>+
> >>>>>+                    status = "disabled";
> >>>>>+
> >>>>>+                    #clock-cells = <0>;
> >>>>>+                    clock-output-names = "usb0_pipe_clk";
> >>>>>+            };
> >>>>>+
> >>>>>             pcie0_phy: phy@84000 {
> >>>>>                     compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
> >>>>>                     reg = <0x00084000 0x1000>;
> >>>>>@@ -548,6 +621,53 @@
> >>>>>                     status = "disabled";
> >>>>>             };
> >>>>>+            usb3: usb@8a00000 {
> >>>>>+                    compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
> >>>>>+                    reg = <0x08af8800 0x400>;
> >>>>>+                    #address-cells = <1>;
> >>>>>+                    #size-cells = <1>;
> >>>>>+                    ranges;
> >>>>>+
> >>>>>+                    clocks = <&gcc GCC_SNOC_USB_CLK>,
> >>>>>+                             <&gcc GCC_USB0_MASTER_CLK>,
> >>>>>+                             <&gcc GCC_ANOC_USB_AXI_CLK>,
> >>>>>+                             <&gcc GCC_USB0_SLEEP_CLK>,
> >>>>>+                             <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> >>>>>+
> >>>>>+                    clock-names = "cfg_noc",
> >>>>>+                                  "core",
> >>>>>+                                  "iface",
> >>>>>+                                  "sleep",
> >>>>>+                                  "mock_utmi";
> >>>>>+
> >>>>>+                    assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> >>>>>+                                      <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> >>>>>+                    assigned-clock-rates = <200000000>,
> >>>>>+                                           <24000000>;
> >>>>>+
> >>>>>+                    interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> >>>>>+                    interrupt-names = "pwr_event";
> >>>>>+
> >>>>>+                    resets = <&gcc GCC_USB_BCR>;
> >>>>>+                    status = "disabled";
> >>>>>+
> >>>>>+                    dwc_0: usb@8a00000 {
> >>>>>+                            compatible = "snps,dwc3";
> >>>>>+                            reg = <0x8a00000 0xcd00>;
> >>>>>+                            clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> >>>>>+                            clock-names = "ref";
> >>>>>+                            interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> >>>>>+                            phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
> >>>>>+                            phy-names = "usb2-phy", "usb3-phy";
> >>>>>+                            tx-fifo-resize;
> >>>>>+                            snps,is-utmi-l1-suspend;
> >>>>>+                            snps,hird-threshold = /bits/ 8 <0x0>;
> >>>>>+                            snps,dis_u2_susphy_quirk;
> >>>>>+                            snps,dis_u3_susphy_quirk;
> >>>>>+                            dr_mode = "host";
> >>>>>+                    };
> >>>>>+            };
> >>>>>+
> >>>>>             intc: interrupt-controller@b000000 {
> >>>>>                     compatible = "qcom,msm-qgic2";
> >>>>>                     reg = <0x0b000000 0x1000>,  /* GICD */
> >>>>
> >>>>--
> >>>>With best wishes
> >>>>Dmitry
> >>>>
> >>
> >>
> >>
> >>--
> >>With best wishes
> >>Dmitry
>
> --
> With best wishes
> Dmitry
>



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux