On 27.4.2023 22.01, Wesley Cheng wrote:
There is a 120ms delay implemented for allowing the XHCI host controller to
detect a U3 wakeup pulse. The intention is to wait for the device to retry
the wakeup event if the USB3 PORTSC doesn't reflect the RESUME link status
by the time it is checked. As per the USB3 specification:
tU3WakeupRetryDelay ("Table 7-12. LTSSM State Transition Timeouts")
This would allow the XHCI resume sequence to determine if the root hub
needs to be also resumed. However, in case there is no device connected,
or if there is only a HSUSB device connected, this delay would still affect
the overall resume timing.
Since this delay is solely for detecting U3 wake events (USB3 specific)
then ignore this delay for the disconnected case and the HSUSB connected
only case.
Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
---
drivers/usb/host/xhci.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 78790dc13c5f..7a86cd683502 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -834,7 +834,8 @@ static bool xhci_pending_portevent(struct xhci_hcd *xhci)
while (port_index--) {
portsc = readl(ports[port_index]->addr);
if (portsc & PORT_CHANGE_MASK ||
- (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+ (portsc & PORT_PLS_MASK) == XDEV_RESUME ||
+ !(portsc & PORT_CONNECT))
return true;
This change will report a pending port event at the first empty roothub port.
I think we are looking for something like this instead (pseudo):
@@ -1116,7 +1116,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
* the first wake signalling failed, give it that chance.
*/
pending_portevent = xhci_pending_portevent(xhci);
- if (!pending_portevent) {
+ if (!pending_portevent && usb3_devices_connected && runtime_resume) {
msleep(120);
pending_portevent = xhci_pending_portevent(xhci);
}
Thanks
Mathias
