Update relavent DT bindings for USB, add new config to the phy driver,
add USB and PHY nodes to the .dtsi and enable them in the board .dts
for the sa8775p-ride platform.
Shazad Hussain (6):
dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P
dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for SA8775P
dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add SA8775P USB PHY
binding
phy: qcom-qmp: Add SA8775P USB3 UNI phy
arm64: dts: qcom: sa8775p: add USB nodes
arm64: dts: qcom: sa8775p-ride: enable USB nodes
.../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 1 +
.../bindings/phy/qcom,usb-snps-femto-v2.yaml | 1 +
.../devicetree/bindings/usb/qcom,dwc3.yaml | 5 +
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 92 +++++++
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 239 +++++++++++++++++-
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 45 ++++
6 files changed, 381 insertions(+), 2 deletions(-)
--
2.17.1
