On Wed, Apr 05, 2023 at 06:27:57PM +0530, Krishna Kurapati wrote: > Add USB and DWC3 node for tertiary port of SC8280 along with multiport > IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride > platforms. > > Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx> > --- > Link to v5: https://lore.kernel.org/all/20230310163420.7582-7-quic_kriskura@xxxxxxxxxxx/ > > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 58 ++++++++++++++++++++++++++ > 1 file changed, 58 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index 42bfa9fa5b96..7b81f2b0449d 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -3108,6 +3108,64 @@ usb_1_role_switch: endpoint { > }; > }; > > + usb_2: usb@a4f8800 { > + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; > + reg = <0 0x0a4f8800 0 0x400>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, > + <&gcc GCC_USB30_MP_MASTER_CLK>, > + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, > + <&gcc GCC_USB30_MP_SLEEP_CLK>, > + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, > + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, > + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, > + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, > + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; > + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", > + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; > + > + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, > + <&gcc GCC_USB30_MP_MASTER_CLK>; > + assigned-clock-rates = <19200000>, <200000000>; > + > + interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>, > + <&pdc 126 IRQ_TYPE_EDGE_RISING>, > + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; > + > + interrupt-names = "dp_hs_phy_irq", "dm_hs_phy_irq", > + "ss_phy_irq"; > + This is breaking the current schema (with the full series applied), I am not sure if a pwr_event IRQ exists or but it maybe necessary to modify qcom,dwc3.yaml in order to explain hardware if it doesn't exist: (dtschema) ahalaney@halaney-x13s ~/git/linux-next (git)-[718f2024524f] % make CHECK_DTBS=y DT_SCHEMA_FILES=/usb/qcom,dwc3.yaml qcom/sa8540p-ride.dtb :( LINT Documentation/devicetree/bindings CHKDT Documentation/devicetree/bindings/processed-schema.json SCHEMA Documentation/devicetree/bindings/processed-schema.json DTC_CHK arch/arm64/boot/dts/qcom/sa8540p-ride.dtb /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupt-names:0: 'pwr_event' was expected From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupt-names:1: 'dp_hs_phy_irq' was expected From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupt-names:2: 'dm_hs_phy_irq' was expected From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupt-names: ['dp_hs_phy_irq', 'dm_hs_phy_irq', 'ss_phy_irq'] is too short From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupts-extended: [[99, 127, 1], [99, 126, 1], [99, 16, 4]] is too short From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml make CHECK_DTBS=y DT_SCHEMA_FILES=/usb/qcom,dwc3.yaml qcom/sa8540p-ride.dtb 22.61s user 0.54s system 99% cpu 23.172 total (dtschema) ahalaney@halaney-x13s ~/git/linux-next (git)-[718f2024524f] % Thanks, Andrew
