[PATCH v6 6/8] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add USB and DWC3 node for tertiary port of SC8280 along with multiport
IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride
platforms.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
Link to v5: https://lore.kernel.org/all/20230310163420.7582-7-quic_kriskura@xxxxxxxxxxx/

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 58 ++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 42bfa9fa5b96..7b81f2b0449d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3108,6 +3108,64 @@ usb_1_role_switch: endpoint {
 			};
 		};
 
+		usb_2: usb@a4f8800 {
+			compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+			reg = <0 0x0a4f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MP_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>,
+						<&pdc 126 IRQ_TYPE_EDGE_RISING>,
+						<&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "dp_hs_phy_irq", "dm_hs_phy_irq",
+						"ss_phy_irq";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			resets = <&gcc GCC_USB30_MP_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			required-opps = <&rpmhpd_opp_nom>;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a400000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x800 0x0>;
+				phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
+					<&usb_2_hsphy1>, <&usb_2_qmpphy1>,
+					<&usb_2_hsphy2>,
+					<&usb_2_hsphy3>;
+				phy-names = "usb2-port0", "usb3-port0",
+						"usb2-port1", "usb3-port1",
+						"usb2-port2",
+						"usb2-port3";
+			};
+		};
+
 		mdss0: display-subsystem@ae00000 {
 			compatible = "qcom,sc8280xp-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
-- 
2.40.0




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux