I don't know exactly when this started happening, sometime after 2.6.30 I think. I have a couple of mice that don't work if they're plugged in at boot. During and after boot (while not working) see a bunch of: [ 88.364551] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled messages in the log (full dmesg attached). If I unplug the mouse and plug it back in, it works fine. But it's a pain to do this after every reboot. Any ideas? Sarah thought it might be related to some of the boot time speedup stuff that's gone in fairly recently. Thanks, -- Jesse Barnes, Intel Open Source Technology Center
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-rc4 (jbarnes@jbarnes-piketon) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #2 SMP Wed Nov 4 14:06:23 PST 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc4 root=UUID=9ed51526-6919-4a9b-ae3e-ea6b979e3452 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b32e1000 (usable) [ 0.000000] BIOS-e820: 00000000b32e1000 - 00000000b3599000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b3599000 - 00000000b35a0000 (reserved) [ 0.000000] BIOS-e820: 00000000b35a0000 - 00000000b35a4000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b35a4000 - 00000000b35db000 (reserved) [ 0.000000] BIOS-e820: 00000000b35db000 - 00000000b35e8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b35e8000 - 00000000b35f1000 (reserved) [ 0.000000] BIOS-e820: 00000000b35f1000 - 00000000b35fb000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b35fb000 - 00000000b3620000 (reserved) [ 0.000000] BIOS-e820: 00000000b3620000 - 00000000b3663000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b3663000 - 00000000b3800000 (usable) [ 0.000000] BIOS-e820: 00000000b3800000 - 00000000b4000000 (reserved) [ 0.000000] BIOS-e820: 00000000b7c00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fed50000 - 00000000fed60000 (reserved) [ 0.000000] BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 0A0000000 mask FF0000000 write-back [ 0.000000] 3 base 0B0000000 mask FFC000000 write-back [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 base 138000000 mask FF8000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ac00 (usable) [ 0.000000] modified: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b32e1000 (usable) [ 0.000000] modified: 00000000b32e1000 - 00000000b3599000 (ACPI NVS) [ 0.000000] modified: 00000000b3599000 - 00000000b35a0000 (reserved) [ 0.000000] modified: 00000000b35a0000 - 00000000b35a4000 (ACPI NVS) [ 0.000000] modified: 00000000b35a4000 - 00000000b35db000 (reserved) [ 0.000000] modified: 00000000b35db000 - 00000000b35e8000 (ACPI data) [ 0.000000] modified: 00000000b35e8000 - 00000000b35f1000 (reserved) [ 0.000000] modified: 00000000b35f1000 - 00000000b35fb000 (ACPI NVS) [ 0.000000] modified: 00000000b35fb000 - 00000000b3620000 (reserved) [ 0.000000] modified: 00000000b3620000 - 00000000b3663000 (ACPI NVS) [ 0.000000] modified: 00000000b3663000 - 00000000b3800000 (usable) [ 0.000000] modified: 00000000b3800000 - 00000000b4000000 (reserved) [ 0.000000] modified: 00000000b7c00000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fed50000 - 00000000fed60000 (reserved) [ 0.000000] modified: 00000000ff980000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000138000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000b3800000 [ 0.000000] 0000000000 - 00b3800000 page 2M [ 0.000000] kernel direct mapping tables up to b3800000 @ 10000-14000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000 [ 0.000000] 0100000000 - 0138000000 page 2M [ 0.000000] kernel direct mapping tables up to 138000000 @ 12000-18000 [ 0.000000] RAMDISK: 33d7a000 - 37fef5f9 [ 0.000000] ACPI: RSDP 00000000000f03f0 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000b35e6e18 00054 (v01 ALASKA A M I 06222004 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000b35e5d98 000F4 (v04 ALASKA A M I 06222004 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - B35F8E40/00000000B35F8D40, using 32 (20090903/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000b35db018 0985A (v01 ALASKA A M I 00000142 INTL 20051117) [ 0.000000] ACPI: FACS 00000000b35f8e40 00040 [ 0.000000] ACPI: APIC 00000000b35e5f18 000CC (v02 ALASKA A M I 06222004 MSFT 00010013) [ 0.000000] ACPI: MCFG 00000000b35e7f18 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000b35e6c18 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: HPET 00000000b35e7e98 00038 (v01 A M I ICH7HPET 06222004 AMI. 00000003) [ 0.000000] ACPI: DMAR 00000000b35e6b18 00088 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000138000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000138000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003efff] pages 27 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0138000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019fff44] TEXT DATA BSS ==> [0001000000 - 00019fff44] [ 0.000000] #3 [0033d7a000 - 0037fef5f9] RAMDISK ==> [0033d7a000 - 0037fef5f9] [ 0.000000] #4 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000] [ 0.000000] #5 [0001a00000 - 0001a001f8] BRK ==> [0001a00000 - 0001a001f8] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000fccb0] fccb0 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00138000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000b32e1 [ 0.000000] 0: 0x000b3663 -> 0x000b3800 [ 0.000000] 0: 0x00100000 -> 0x00138000 [ 0.000000] On node 0 totalpages: 963592 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3815 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 715958 pages, LIFO batch:31 [ 0.000000] Normal zone: 3136 pages used for memmap [ 0.000000] Normal zone: 226240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b32e1000 - 00000000b3599000 [ 0.000000] PM: Registered nosave memory: 00000000b3599000 - 00000000b35a0000 [ 0.000000] PM: Registered nosave memory: 00000000b35a0000 - 00000000b35a4000 [ 0.000000] PM: Registered nosave memory: 00000000b35a4000 - 00000000b35db000 [ 0.000000] PM: Registered nosave memory: 00000000b35db000 - 00000000b35e8000 [ 0.000000] PM: Registered nosave memory: 00000000b35e8000 - 00000000b35f1000 [ 0.000000] PM: Registered nosave memory: 00000000b35f1000 - 00000000b35fb000 [ 0.000000] PM: Registered nosave memory: 00000000b35fb000 - 00000000b3620000 [ 0.000000] PM: Registered nosave memory: 00000000b3620000 - 00000000b3663000 [ 0.000000] PM: Registered nosave memory: 00000000b3800000 - 00000000b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b7c00000 [ 0.000000] PM: Registered nosave memory: 00000000b7c00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed50000 [ 0.000000] PM: Registered nosave memory: 00000000fed50000 - 00000000fed60000 [ 0.000000] PM: Registered nosave memory: 00000000fed60000 - 00000000ff980000 [ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91672 r8192 d23016 u131072 [ 0.000000] pcpu-alloc: s91672 r8192 d23016 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 946013 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc4 root=UUID=9ed51526-6919-4a9b-ae3e-ea6b979e3452 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3650608k/5111808k available (5359k kernel code, 1257440k absent, 203760k reserved, 3059k data, 684k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:536 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 39321600 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 25 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 26 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 27 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 28 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 3058.996 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6117.99 BogoMIPS (lpj=30589960) [ 0.000018] Security Framework initialized [ 0.000022] SELinux: Disabled at boot. [ 0.000232] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001065] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001448] Mount-cache hash table entries: 256 [ 0.001540] Initializing cgroup subsys ns [ 0.001543] Initializing cgroup subsys cpuacct [ 0.001546] Initializing cgroup subsys memory [ 0.001550] Initializing cgroup subsys freezer [ 0.001551] Initializing cgroup subsys net_cls [ 0.001564] CPU: Physical Processor ID: 0 [ 0.001565] CPU: Processor Core ID: 0 [ 0.001568] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001569] CPU: L2 cache: 256K [ 0.001570] CPU: L3 cache: 4096K [ 0.001572] CPU 0/0x0 -> Node 0 [ 0.001574] mce: CPU supports 9 MCE banks [ 0.001582] CPU0: Thermal monitoring enabled (TM1) [ 0.001585] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 [ 0.001592] using mwait in idle threads. [ 0.001593] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.001597] ... version: 3 [ 0.001598] ... bit width: 48 [ 0.001598] ... generic registers: 4 [ 0.001599] ... value mask: 0000ffffffffffff [ 0.001600] ... max period: 000000007fffffff [ 0.001601] ... fixed-purpose events: 3 [ 0.001602] ... event mask: 000000070000000f [ 0.003114] ACPI: Core revision 20090903 [ 0.015141] Setting APIC routing to flat [ 0.015548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.115330] CPU0: Genuine Intel(R) CPU 000 @ 3.07GHz stepping 01 [ 0.233161] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.243505] Initializing CPU#1 [ 0.392703] Calibrating delay using timer specific routine.. 6117.94 BogoMIPS (lpj=30589736) [ 0.392711] CPU: Physical Processor ID: 0 [ 0.392712] CPU: Processor Core ID: 0 [ 0.392715] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.392716] CPU: L2 cache: 256K [ 0.392717] CPU: L3 cache: 4096K [ 0.392719] CPU 1/0x1 -> Node 0 [ 0.392722] mce: CPU supports 9 MCE banks [ 0.392731] CPU1: Thermal monitoring enabled (TM1) [ 0.392734] CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.392747] CPU1: Genuine Intel(R) CPU 000 @ 3.07GHz stepping 01 [ 0.392755] Skipping synchronization checks as TSC is reliable. [ 0.392836] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.403044] Initializing CPU#2 [ 0.552343] Calibrating delay using timer specific routine.. 6117.95 BogoMIPS (lpj=30589788) [ 0.552349] CPU: Physical Processor ID: 0 [ 0.552350] CPU: Processor Core ID: 2 [ 0.552352] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.552353] CPU: L2 cache: 256K [ 0.552354] CPU: L3 cache: 4096K [ 0.552355] CPU 2/0x4 -> Node 0 [ 0.552358] mce: CPU supports 9 MCE banks [ 0.552366] CPU2: Thermal monitoring enabled (TM1) [ 0.552369] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 [ 0.552453] CPU2: Genuine Intel(R) CPU 000 @ 3.07GHz stepping 01 [ 0.552536] Booting processor 3 APIC 0x5 ip 0x6000 [ 0.562745] Initializing CPU#3 [ 0.711983] Calibrating delay using timer specific routine.. 6117.95 BogoMIPS (lpj=30589796) [ 0.711989] CPU: Physical Processor ID: 0 [ 0.711989] CPU: Processor Core ID: 2 [ 0.711991] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.711992] CPU: L2 cache: 256K [ 0.711993] CPU: L3 cache: 4096K [ 0.711995] CPU 3/0x5 -> Node 0 [ 0.711997] mce: CPU supports 9 MCE banks [ 0.712005] CPU3: Thermal monitoring enabled (TM1) [ 0.712008] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.712106] CPU3: Genuine Intel(R) CPU 000 @ 3.07GHz stepping 01 [ 0.712127] Brought up 4 CPUs [ 0.712128] Total of 4 processors activated (24471.85 BogoMIPS). [ 0.713352] CPU0 attaching sched-domain: [ 0.713355] domain 0: span 0-1 level SIBLING [ 0.713357] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.713360] domain 1: span 0-3 level MC [ 0.713361] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.713366] CPU1 attaching sched-domain: [ 0.713367] domain 0: span 0-1 level SIBLING [ 0.713368] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.713371] domain 1: span 0-3 level MC [ 0.713372] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.713376] CPU2 attaching sched-domain: [ 0.713377] domain 0: span 2-3 level SIBLING [ 0.713378] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 0.713380] domain 1: span 0-3 level MC [ 0.713382] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.713385] CPU3 attaching sched-domain: [ 0.713386] domain 0: span 2-3 level SIBLING [ 0.713387] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 0.713390] domain 1: span 0-3 level MC [ 0.713391] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.713830] regulator: core version 0.5 [ 0.713863] Time: 22:21:07 Date: 11/04/09 [ 0.713898] NET: Registered protocol family 16 [ 0.713974] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.713976] ACPI: bus type pci registered [ 0.714035] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.714037] PCI: Not using MMCONFIG. [ 0.714038] PCI: Using configuration type 1 for base access [ 0.714531] bio: create slab <bio-0> at 0 [ 0.715232] ACPI: EC: Look up EC in DSDT [ 0.717426] ACPI: Executed 1 blocks of module-level executable AML code [ 0.726090] ACPI: Interpreter enabled [ 0.726093] ACPI: (supports S0 S1 S3 S4 S5) [ 0.726109] ACPI: Using IOAPIC for interrupt routing [ 0.726157] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.726235] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.731276] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.731575] ACPI: BIOS _OSI(Linux) query ignored [ 0.736521] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.738475] ACPI: Power Resource [PFAN] (on) [ 0.738673] ACPI: No dock devices found. [ 0.738878] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.738937] pci 0000:00:02.0: reg 10 64bit mmio: [0xff000000-0xff3fffff] [ 0.738942] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.738944] pci 0000:00:02.0: reg 20 io port: [0xf100-0xf107] [ 0.739034] pci 0000:00:16.0: reg 10 64bit mmio: [0xff5c0000-0xff5c000f] [ 0.739102] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.739106] pci 0000:00:16.0: PME# disabled [ 0.739150] pci 0000:00:16.2: reg 10 io port: [0xf0f0-0xf0f7] [ 0.739156] pci 0000:00:16.2: reg 14 io port: [0xf0e0-0xf0e3] [ 0.739163] pci 0000:00:16.2: reg 18 io port: [0xf0d0-0xf0d7] [ 0.739170] pci 0000:00:16.2: reg 1c io port: [0xf0c0-0xf0c3] [ 0.739177] pci 0000:00:16.2: reg 20 io port: [0xf0b0-0xf0bf] [ 0.739257] pci 0000:00:16.3: reg 10 io port: [0xf0a0-0xf0a7] [ 0.739264] pci 0000:00:16.3: reg 14 32bit mmio: [0xff5a0000-0xff5a0fff] [ 0.739389] pci 0000:00:17.0: reg 10 64bit mmio: [0xff590000-0xff590fff] [ 0.739423] pci 0000:00:17.0: reg 18 64bit mmio: [0xff580000-0xff5800ff] [ 0.739494] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold [ 0.739504] pci 0000:00:17.0: PME# disabled [ 0.739559] pci 0000:00:19.0: reg 10 32bit mmio: [0xff500000-0xff51ffff] [ 0.739565] pci 0000:00:19.0: reg 14 32bit mmio: [0xff570000-0xff570fff] [ 0.739571] pci 0000:00:19.0: reg 18 io port: [0xf040-0xf05f] [ 0.739617] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.739621] pci 0000:00:19.0: PME# disabled [ 0.739670] pci 0000:00:1a.0: reg 10 32bit mmio: [0xff560000-0xff5603ff] [ 2.727442] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.727582] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.727586] pci 0000:00:1a.0: PME# disabled [ 2.727632] pci 0000:00:1b.0: reg 10 64bit mmio: [0xff550000-0xff553fff] [ 2.727682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.727685] pci 0000:00:1b.0: PME# disabled [ 2.727762] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.727765] pci 0000:00:1c.0: PME# disabled [ 2.727844] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.727848] pci 0000:00:1c.1: PME# disabled [ 2.727924] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 2.727928] pci 0000:00:1c.2: PME# disabled [ 2.728005] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 2.728008] pci 0000:00:1c.3: PME# disabled [ 2.728085] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.728089] pci 0000:00:1c.4: PME# disabled [ 2.728167] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 2.728171] pci 0000:00:1c.6: PME# disabled [ 2.728248] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 2.728251] pci 0000:00:1c.7: PME# disabled [ 2.728305] pci 0000:00:1d.0: reg 10 32bit mmio: [0xff540000-0xff5403ff] [ 4.722937] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 4.723076] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 4.723080] pci 0000:00:1d.0: PME# disabled [ 4.723272] pci 0000:00:1f.2: reg 10 io port: [0xf090-0xf097] [ 4.723279] pci 0000:00:1f.2: reg 14 io port: [0xf080-0xf083] [ 4.723285] pci 0000:00:1f.2: reg 18 io port: [0xf070-0xf077] [ 4.723291] pci 0000:00:1f.2: reg 1c io port: [0xf060-0xf063] [ 4.723297] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f] [ 4.723304] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff530000-0xff5307ff] [ 4.723343] pci 0000:00:1f.2: PME# supported from D3hot [ 4.723347] pci 0000:00:1f.2: PME# disabled [ 4.723380] pci 0000:00:1f.3: reg 10 64bit mmio: [0xff520000-0xff5200ff] [ 4.723395] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] [ 4.723884] pci 0000:06:00.0: supports D1 D2 [ 4.723961] pci 0000:00:1c.6: bridge 32bit mmio: [0xff400000-0xff4fffff] [ 4.724058] pci 0000:07:00.0: reg 10 32bit mmio: [0xff410000-0xff4107ff] [ 4.724075] pci 0000:07:00.0: reg 14 32bit mmio: [0xff400000-0xff403fff] [ 4.724185] pci 0000:07:00.0: supports D1 D2 [ 4.724186] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot [ 4.724197] pci 0000:07:00.0: PME# disabled [ 4.724311] pci 0000:06:00.0: bridge 32bit mmio: [0xff400000-0xff4fffff] [ 4.724435] pci 0000:00:1e.0: transparent bridge [ 4.724486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.724631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 4.724752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 4.724797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 4.724841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 4.724885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 4.724929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 4.724977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 4.725022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 4.732380] ACPI: PCI Root Bridge [PCI1] (0000:ff) [ 4.732479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] [ 4.732722] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 4.732827] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 4.732934] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 4.733038] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 4.733139] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 4.733242] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 4.733344] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 4.733446] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 4.733514] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 4.733523] vgaarb: loaded [ 4.733580] SCSI subsystem initialized [ 4.733636] libata version 3.00 loaded. [ 4.733677] usbcore: registered new interface driver usbfs [ 4.733685] usbcore: registered new interface driver hub [ 4.733700] usbcore: registered new device driver usb [ 4.733772] ACPI: WMI: Mapper loaded [ 4.733773] PCI: Using ACPI for IRQ routing [ 4.733935] Bluetooth: Core ver 2.15 [ 4.733954] NET: Registered protocol family 31 [ 4.733955] Bluetooth: HCI device and connection manager initialized [ 4.733957] Bluetooth: HCI socket layer initialized [ 4.733958] NetLabel: Initializing [ 4.733959] NetLabel: domain hash size = 128 [ 4.733960] NetLabel: protocols = UNLABELED CIPSOv4 [ 4.733968] NetLabel: unlabeled traffic allowed by default [ 4.734006] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 4.734011] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 4.742908] hpet: hpet2 irq 24 for MSI [ 4.742964] hpet: hpet3 irq 25 for MSI [ 4.752938] hpet: hpet4 irq 26 for MSI [ 4.762914] hpet: hpet5 irq 27 for MSI [ 4.762923] Switching to clocksource tsc [ 4.763989] pnp: PnP ACPI init [ 4.764001] ACPI: bus type pnp registered [ 4.766645] pnp: PnP ACPI: found 12 devices [ 4.766646] ACPI: ACPI bus type pnp unregistered [ 4.766653] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 4.766655] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 4.766658] system 00:02: ioport range 0xb00-0xb1f has been reserved [ 4.766660] system 00:02: ioport range 0xa00-0xa3f has been reserved [ 4.766661] system 00:02: ioport range 0xa86-0xa95 has been reserved [ 4.766663] system 00:02: ioport range 0xa40-0xa4f has been reserved [ 4.766666] system 00:03: ioport range 0x600-0x66f has been reserved [ 4.766667] system 00:03: ioport range 0x680-0x69f has been reserved [ 4.766669] system 00:03: ioport range 0x290-0x29f has been reserved [ 4.766672] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 4.766675] system 00:09: ioport range 0x400-0x47f has been reserved [ 4.766677] system 00:09: ioport range 0x1180-0x119f has been reserved [ 4.766679] system 00:09: ioport range 0x500-0x57f has been reserved [ 4.766680] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 4.766682] system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved [ 4.766684] system 00:09: iomem range 0xfee00000-0xfee0ffff has been reserved [ 4.766685] system 00:09: iomem range 0xff000000-0xffffffff could not be reserved [ 4.771385] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 4.771388] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 4.771394] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff [ 4.771398] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff [ 4.771404] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 4.771407] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 4.771412] pci 0000:00:1c.1: MEM window: 0xc0400000-0xc05fffff [ 4.771416] pci 0000:00:1c.1: PREFETCH window: 0x000000c0600000-0x000000c07fffff [ 4.771422] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 4.771425] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 4.771430] pci 0000:00:1c.2: MEM window: 0xc0800000-0xc09fffff [ 4.771433] pci 0000:00:1c.2: PREFETCH window: 0x000000c0a00000-0x000000c0bfffff [ 4.771440] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 [ 4.771442] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 4.771447] pci 0000:00:1c.3: MEM window: 0xc0c00000-0xc0dfffff [ 4.771451] pci 0000:00:1c.3: PREFETCH window: 0x000000c0e00000-0x000000c0ffffff [ 4.771457] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 [ 4.771460] pci 0000:00:1c.4: IO window: 0x6000-0x6fff [ 4.771465] pci 0000:00:1c.4: MEM window: 0xc1000000-0xc11fffff [ 4.771469] pci 0000:00:1c.4: PREFETCH window: 0x000000c1200000-0x000000c13fffff [ 4.771475] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 [ 4.771476] pci 0000:06:00.0: IO window: disabled [ 4.771501] pci 0000:06:00.0: MEM window: 0xff400000-0xff4fffff [ 4.771511] pci 0000:06:00.0: PREFETCH window: disabled [ 4.771518] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:06 [ 4.771520] pci 0000:00:1c.6: IO window: 0x7000-0x7fff [ 4.771525] pci 0000:00:1c.6: MEM window: 0xff400000-0xff4fffff [ 4.771529] pci 0000:00:1c.6: PREFETCH window: 0x000000c1400000-0x000000c15fffff [ 4.771536] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:08 [ 4.771538] pci 0000:00:1c.7: IO window: 0x8000-0x8fff [ 4.771543] pci 0000:00:1c.7: MEM window: 0xc1600000-0xc17fffff [ 4.771547] pci 0000:00:1c.7: PREFETCH window: 0x000000c1800000-0x000000c19fffff [ 4.771553] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 4.771554] pci 0000:00:1e.0: IO window: disabled [ 4.771559] pci 0000:00:1e.0: MEM window: disabled [ 4.771562] pci 0000:00:1e.0: PREFETCH window: disabled [ 4.771573] alloc irq_desc for 17 on node -1 [ 4.771574] alloc kstat_irqs on node -1 [ 4.771578] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.771583] pci 0000:00:1c.0: setting latency timer to 64 [ 4.771589] alloc irq_desc for 16 on node -1 [ 4.771590] alloc kstat_irqs on node -1 [ 4.771592] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 4.771596] pci 0000:00:1c.1: setting latency timer to 64 [ 4.771603] alloc irq_desc for 18 on node -1 [ 4.771604] alloc kstat_irqs on node -1 [ 4.771606] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.771609] pci 0000:00:1c.2: setting latency timer to 64 [ 4.771615] alloc irq_desc for 19 on node -1 [ 4.771616] alloc kstat_irqs on node -1 [ 4.771619] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.771622] pci 0000:00:1c.3: setting latency timer to 64 [ 4.771629] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.771633] pci 0000:00:1c.4: setting latency timer to 64 [ 4.771639] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.771643] pci 0000:00:1c.6: setting latency timer to 64 [ 4.771674] pci 0000:06:00.0: setting latency timer to 64 [ 4.771682] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.771686] pci 0000:00:1c.7: setting latency timer to 64 [ 4.771692] pci 0000:00:1e.0: setting latency timer to 64 [ 4.771696] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 4.771697] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 4.771699] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 4.771700] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xc01fffff] [ 4.771702] pci_bus 0000:01: resource 2 pref mem [0xc0200000-0xc03fffff] [ 4.771703] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 4.771704] pci_bus 0000:02: resource 1 mem: [0xc0400000-0xc05fffff] [ 4.771706] pci_bus 0000:02: resource 2 pref mem [0xc0600000-0xc07fffff] [ 4.771707] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 4.771708] pci_bus 0000:03: resource 1 mem: [0xc0800000-0xc09fffff] [ 4.771710] pci_bus 0000:03: resource 2 pref mem [0xc0a00000-0xc0bfffff] [ 4.771711] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff] [ 4.771712] pci_bus 0000:04: resource 1 mem: [0xc0c00000-0xc0dfffff] [ 4.771714] pci_bus 0000:04: resource 2 pref mem [0xc0e00000-0xc0ffffff] [ 4.771715] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] [ 4.771716] pci_bus 0000:05: resource 1 mem: [0xc1000000-0xc11fffff] [ 4.771717] pci_bus 0000:05: resource 2 pref mem [0xc1200000-0xc13fffff] [ 4.771719] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff] [ 4.771720] pci_bus 0000:06: resource 1 mem: [0xff400000-0xff4fffff] [ 4.771721] pci_bus 0000:06: resource 2 pref mem [0xc1400000-0xc15fffff] [ 4.771723] pci_bus 0000:07: resource 1 mem: [0xff400000-0xff4fffff] [ 4.771724] pci_bus 0000:08: resource 0 io: [0x8000-0x8fff] [ 4.771726] pci_bus 0000:08: resource 1 mem: [0xc1600000-0xc17fffff] [ 4.771727] pci_bus 0000:08: resource 2 pref mem [0xc1800000-0xc19fffff] [ 4.771728] pci_bus 0000:09: resource 3 io: [0x00-0xffff] [ 4.771730] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff] [ 4.771731] pci_bus 0000:ff: resource 0 io: [0x00-0xffff] [ 4.771732] pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff] [ 4.771753] NET: Registered protocol family 2 [ 4.771866] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.772543] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 4.774119] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.774312] TCP: Hash tables configured (established 524288 bind 65536) [ 4.774314] TCP reno registered [ 4.774419] NET: Registered protocol family 1 [ 4.774463] Trying to unpack rootfs image as initramfs... [ 5.790628] Freeing initrd memory: 68053k freed [ 5.802757] Scanning for low memory corruption every 60 seconds [ 5.802858] audit: initializing netlink socket (disabled) [ 5.802870] type=2000 audit(1257373272.710:1): initialized [ 5.809580] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.810444] VFS: Disk quotas dquot_6.5.2 [ 5.810478] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.810856] fuse init (API version 7.13) [ 5.810903] msgmni has been set to 7263 [ 5.811070] alg: No test for stdrng (krng) [ 5.811076] io scheduler noop registered [ 5.811077] io scheduler anticipatory registered [ 5.811078] io scheduler deadline registered [ 5.811103] io scheduler cfq registered (default) [ 5.811111] pci 0000:00:02.0: Boot video device [ 5.811238] alloc irq_desc for 29 on node -1 [ 5.811239] alloc kstat_irqs on node -1 [ 5.811249] pcieport-driver 0000:00:1c.0: irq 29 for MSI/MSI-X [ 5.811260] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 5.811378] alloc irq_desc for 30 on node -1 [ 5.811379] alloc kstat_irqs on node -1 [ 5.811386] pcieport-driver 0000:00:1c.1: irq 30 for MSI/MSI-X [ 5.811394] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 5.811505] alloc irq_desc for 31 on node -1 [ 5.811506] alloc kstat_irqs on node -1 [ 5.811512] pcieport-driver 0000:00:1c.2: irq 31 for MSI/MSI-X [ 5.811521] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 5.811635] alloc irq_desc for 32 on node -1 [ 5.811636] alloc kstat_irqs on node -1 [ 5.811643] pcieport-driver 0000:00:1c.3: irq 32 for MSI/MSI-X [ 5.811652] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 5.811765] alloc irq_desc for 33 on node -1 [ 5.811766] alloc kstat_irqs on node -1 [ 5.811773] pcieport-driver 0000:00:1c.4: irq 33 for MSI/MSI-X [ 5.811781] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 5.811892] alloc irq_desc for 34 on node -1 [ 5.811893] alloc kstat_irqs on node -1 [ 5.811899] pcieport-driver 0000:00:1c.6: irq 34 for MSI/MSI-X [ 5.811908] pcieport-driver 0000:00:1c.6: setting latency timer to 64 [ 5.812019] alloc irq_desc for 35 on node -1 [ 5.812020] alloc kstat_irqs on node -1 [ 5.812027] pcieport-driver 0000:00:1c.7: irq 35 for MSI/MSI-X [ 5.812035] pcieport-driver 0000:00:1c.7: setting latency timer to 64 [ 5.812152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.812170] Firmware did not grant requested _OSC control [ 5.812182] Firmware did not grant requested _OSC control [ 5.812191] Firmware did not grant requested _OSC control [ 5.812200] Firmware did not grant requested _OSC control [ 5.812209] Firmware did not grant requested _OSC control [ 5.812217] Firmware did not grant requested _OSC control [ 5.812226] Firmware did not grant requested _OSC control [ 5.812244] Firmware did not grant requested _OSC control [ 5.812252] Firmware did not grant requested _OSC control [ 5.812261] Firmware did not grant requested _OSC control [ 5.812269] Firmware did not grant requested _OSC control [ 5.812277] Firmware did not grant requested _OSC control [ 5.812286] Firmware did not grant requested _OSC control [ 5.812294] Firmware did not grant requested _OSC control [ 5.812303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.812385] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 5.812392] ACPI: Sleep Button [SLPB] [ 5.812417] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 5.812421] ACPI: Power Button [PWRB] [ 5.812446] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 5.812447] ACPI: Power Button [PWRF] [ 5.812655] fan PNP0C0B:00: registered as cooling_device0 [ 5.812658] ACPI: Fan [FAN0] (on) [ 5.813539] ACPI: SSDT 00000000b35f1018 01054 (v01 AMI IST 00000001 MSFT 03000001) [ 5.814202] Monitor-Mwait will be used to enter C-3 state [ 5.814229] processor LNXCPU:00: registered as cooling_device1 [ 5.814755] processor LNXCPU:01: registered as cooling_device2 [ 5.815287] processor LNXCPU:02: registered as cooling_device3 [ 5.815795] processor LNXCPU:03: registered as cooling_device4 [ 5.819128] thermal LNXTHERM:01: registered as thermal_zone0 [ 5.819132] ACPI: Thermal Zone [TZ01] (34 C) [ 5.819808] Linux agpgart interface v0.103 [ 5.819811] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.820012] serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.820095] 0000:00:16.3: ttyS0 at I/O 0xf0a0 (irq = 19) is a 16550A [ 5.820638] brd: module loaded [ 5.820892] loop: module loaded [ 5.820931] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 5.820980] ahci 0000:00:1f.2: version 3.0 [ 5.820988] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.821018] alloc irq_desc for 36 on node -1 [ 5.821019] alloc kstat_irqs on node -1 [ 5.821026] ahci 0000:00:1f.2: irq 36 for MSI/MSI-X [ 5.821059] ahci: SSS flag set, parallel bus scan disabled [ 5.831596] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 7 ports ? Gbps 0x7f impl SATA mode [ 5.831601] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part sxs apst nvmp [ 5.831608] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.831861] scsi0 : ahci [ 5.831915] scsi1 : ahci [ 5.831944] scsi2 : ahci [ 5.831975] scsi3 : ahci [ 5.832007] scsi4 : ahci [ 5.832036] scsi5 : ahci [ 5.832066] scsi6 : ahci [ 5.832093] ata1: SATA max UDMA/133 abar m2048@0xff530000 port 0xff530100 irq 36 [ 5.832096] ata2: SATA max UDMA/133 abar m2048@0xff530000 port 0xff530180 irq 36 [ 5.832098] ata3: SATA max UDMA/133 abar m2048@0xff530000 port 0xff530200 irq 36 [ 5.832101] ata4: SATA max UDMA/133 abar m2048@0xff530000 port 0xff530280 irq 36 [ 5.832104] ata5: SATA max UDMA/133 abar m2048@0xff530000 port 0xff530300 irq 36 [ 5.832106] ata6: SATA max UDMA/133 abar m2048@0xff530000 port 0xff530380 irq 36 [ 5.832109] ata7: SATA max UDMA/133 abar m2048@0xff530000 port 0xff530400 irq 36 [ 5.832442] pata_acpi 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.832461] pata_acpi 0000:00:16.2: setting latency timer to 64 [ 5.832472] pata_acpi 0000:00:16.2: PCI INT C disabled [ 5.832633] Fixed MDIO Bus: probed [ 5.832652] PPP generic driver version 2.4.2 [ 5.832700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.832712] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.832723] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.832725] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 5.832757] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.832782] ehci_hcd 0000:00:1a.0: debug port 2 [ 5.836653] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 5.836665] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xff560000 [ 5.851499] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.851589] usb usb1: configuration #1 chosen from 1 choice [ 5.851618] hub 1-0:1.0: USB hub found [ 5.851622] hub 1-0:1.0: 3 ports detected [ 5.851656] alloc irq_desc for 23 on node -1 [ 5.851658] alloc kstat_irqs on node -1 [ 5.851661] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.851669] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.851672] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 5.851689] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.851709] ehci_hcd 0000:00:1d.0: debug port 2 [ 5.855593] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 5.855603] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xff540000 [ 5.871454] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.871537] usb usb2: configuration #1 chosen from 1 choice [ 5.871570] hub 2-0:1.0: USB hub found [ 5.871573] hub 2-0:1.0: 3 ports detected [ 5.871607] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.871616] uhci_hcd: USB Universal Host Controller Interface driver [ 5.871674] PNP: No PS/2 controller found. Probing ports directly. [ 5.872556] i8042.c: No controller found. [ 5.872615] mice: PS/2 mouse device common for all mice [ 5.872660] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 5.872680] rtc_cmos 00:05: RTC can wake from S4 [ 5.872700] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.872735] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 5.872791] device-mapper: uevent: version 1.0.3 [ 5.872837] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 5.872898] device-mapper: multipath: version 1.1.0 loaded [ 5.872900] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.873082] cpuidle: using governor ladder [ 5.873169] cpuidle: using governor menu [ 5.873420] TCP cubic registered [ 5.873498] NET: Registered protocol family 10 [ 5.873823] lo: Disabled Privacy Extensions [ 5.874002] NET: Registered protocol family 17 [ 5.874013] Bluetooth: L2CAP ver 2.14 [ 5.874014] Bluetooth: L2CAP socket layer initialized [ 5.874016] Bluetooth: SCO (Voice Link) ver 0.6 [ 5.874016] Bluetooth: SCO socket layer initialized [ 5.874032] Bluetooth: RFCOMM TTY layer initialized [ 5.874033] Bluetooth: RFCOMM socket layer initialized [ 5.874034] Bluetooth: RFCOMM ver 1.11 [ 5.874569] PM: Resume from disk failed. [ 5.874577] registered taskstats version 1 [ 5.875117] Magic number: 1:488:400 [ 5.875196] rtc_cmos 00:05: setting system clock to 2009-11-04 22:21:12 UTC (1257373272) [ 5.875199] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.875200] EDD information not available. [ 6.169941] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 6.179925] ata1: SATA link down (SStatus 0 SControl 300) [ 6.321045] usb 1-1: configuration #1 chosen from 1 choice [ 6.321255] hub 1-1:1.0: USB hub found [ 6.321455] hub 1-1:1.0: 6 ports detected [ 6.439287] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 6.529142] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.530637] ata2.00: ATA-8: ST3500320AS, SD15, max UDMA/133 [ 6.530642] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.532616] ata2.00: configured for UDMA/133 [ 6.532872] scsi 1:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 [ 6.533020] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 6.533047] sd 1:0:0:0: [sda] Write Protect is off [ 6.533049] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.533060] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.533135] sda: [ 6.533189] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 6.545113] sda1 sda2 sda3 [ 6.563448] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.590443] usb 2-1: configuration #1 chosen from 1 choice [ 6.590637] hub 2-1:1.0: USB hub found [ 6.590847] hub 2-1:1.0: 8 ports detected [ 6.668876] usb 1-1.4: new high speed USB device using ehci_hcd and address 3 [ 6.878345] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.878766] ata3.00: ATAPI: ATAPI iHAS322 8, 3L11, max UDMA/100 [ 6.879997] ata3.00: configured for UDMA/100 [ 6.882332] scsi 2:0:0:0: CD-ROM ATAPI iHAS322 8 3L11 PQ: 0 ANSI: 5 [ 6.888830] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.888835] Uniform CD-ROM driver Revision: 3.20 [ 6.888938] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.888982] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 6.895886] usb 1-1.4: configuration #1 chosen from 1 choice [ 6.968233] usb 2-1.4: new high speed USB device using ehci_hcd and address 3 [ 7.078578] usb 2-1.4: configuration #1 chosen from 1 choice [ 7.078800] hub 2-1.4:1.0: USB hub found [ 7.079006] hub 2-1.4:1.0: 4 ports detected [ 7.237498] ata4: SATA link down (SStatus 0 SControl 300) [ 7.357539] usb 2-1.4.1: new high speed USB device using ehci_hcd and address 4 [ 7.467692] usb 2-1.4.1: configuration #1 chosen from 1 choice [ 7.467924] hub 2-1.4.1:1.0: USB hub found [ 7.468133] hub 2-1.4.1:1.0: 4 ports detected [ 7.597067] ata5: SATA link down (SStatus 0 SControl 300) [ 7.946283] ata6: SATA link down (SStatus 0 SControl 300) [ 8.305462] ata7: SATA link down (SStatus 10 SControl 300) [ 8.305511] Freeing unused kernel memory: 684k freed [ 8.305626] Write protecting the kernel read-only data: 7660k [ 8.356630] agpgart-intel 0000:00:00.0: Intel IGDNG/D Chipset [ 8.357309] agpgart-intel 0000:00:00.0: detected 131068K stolen memory [ 8.361543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 8.399612] [drm] Initialized drm 1.1.0 20060810 [ 8.411164] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 8.411167] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 8.411218] alloc irq_desc for 20 on node -1 [ 8.411220] alloc kstat_irqs on node -1 [ 8.411227] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 8.411239] e1000e 0000:00:19.0: setting latency timer to 64 [ 8.411361] alloc irq_desc for 37 on node -1 [ 8.411362] alloc kstat_irqs on node -1 [ 8.411372] e1000e 0000:00:19.0: irq 37 for MSI/MSI-X [ 8.415609] ohci1394 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.485459] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[ff410000-ff4107ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 8.551028] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:20:f8:45:e8 [ 8.551029] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 8.551084] 0000:00:19.0: eth0: MAC: 9, PHY: 9, PBA No: ffffff-0ff [ 8.551111] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.551114] i915 0000:00:02.0: setting latency timer to 64 [ 8.559545] alloc irq_desc for 38 on node -1 [ 8.559550] alloc kstat_irqs on node -1 [ 8.559562] i915 0000:00:02.0: irq 38 for MSI/MSI-X [ 8.559572] [drm] set up 127M of stolen space [ 8.560086] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C [ 8.560669] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D [ 8.643113] fb0: inteldrmfb frame buffer device [ 8.643115] registered panic notifier [ 8.643120] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.737734] [drm] TMDS-12: set mode 2560x1600 21 [ 8.774061] Console: switching to colour frame buffer device 320x100 [ 8.951964] PM: Starting manual resume from disk [ 8.951966] PM: Resume from partition 8:3 [ 8.951967] PM: Checking hibernation image. [ 8.952234] PM: Resume from disk failed. [ 8.992580] kjournald starting. Commit interval 5 seconds [ 8.992606] EXT3-fs: mounted filesystem with writeback data mode. [ 9.802467] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000000000000000] [ 9.912522] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 9.992285] usb 2-1.4.3: new low speed USB device using ehci_hcd and address 5 [ 10.012437] Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k [ 10.108485] usb 2-1.4.3: configuration #1 chosen from 1 choice [ 10.195735] udev: starting version 147 [ 10.620820] EXT3 FS on sda1, internal journal [ 11.306985] usbcore: registered new interface driver hiddev [ 11.310154] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.0/input/input4 [ 11.310269] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4.3/input0 [ 11.310285] usbcore: registered new interface driver usbhid [ 11.310490] usbhid: v2.6:USB HID core driver [ 11.333108] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.822065] kjournald starting. Commit interval 5 seconds [ 11.822481] EXT3 FS on sda2, internal journal [ 11.822488] EXT3-fs: mounted filesystem with writeback data mode. [ 11.982340] lp: driver loaded but no devices found [ 12.527029] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 12.606233] usb 2-1.4.1.1: new high speed USB device using ehci_hcd and address 6 [ 12.754062] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.772543] Linux video capture interface: v2.00 [ 12.778753] usb 2-1.4.1.1: configuration #1 chosen from 1 choice [ 13.059931] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a2) [ 13.074792] input: UVC Camera (046d:09a2) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5 [ 13.074827] usbcore: registered new interface driver uvcvideo [ 13.074829] USB Video Class driver (v0.1.0) [ 13.806040] Initializing USB Mass Storage driver... [ 13.806287] scsi7 : SCSI emulation for USB Mass Storage devices [ 13.806637] usb-storage: device found at 6 [ 13.806639] usb-storage: waiting for device to settle before scanning [ 13.806668] usbcore: registered new interface driver usb-storage [ 13.806696] USB Mass Storage support registered. [ 15.190108] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 15.363417] usbcore: registered new interface driver snd-usb-audio [ 15.619792] e1000e 0000:00:19.0: irq 37 for MSI/MSI-X [ 15.679494] e1000e 0000:00:19.0: irq 37 for MSI/MSI-X [ 15.679862] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.875789] alloc irq_desc for 22 on node -1 [ 15.875792] alloc kstat_irqs on node -1 [ 15.875797] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.875960] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.989565] hda-intel: spurious response 0x80860101:0x3, last cmd=0x30170500 [ 16.017859] hda-intel: spurious response 0x0:0x3, last cmd=0x30670500 [ 16.301534] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 17.714776] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 18.798038] usb-storage: device scan complete [ 18.802101] scsi 7:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 [ 18.805214] scsi 7:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 [ 18.805759] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 18.806370] sd 7:0:0:1: Attached scsi generic sg3 type 0 [ 18.848783] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 18.852857] sd 7:0:0:1: [sdc] Attached SCSI removable disk [ 19.082220] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 19.083902] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.298448] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 22.863403] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 24.100385] CPU0 attaching NULL sched-domain. [ 24.100389] CPU1 attaching NULL sched-domain. [ 24.100391] CPU2 attaching NULL sched-domain. [ 24.100392] CPU3 attaching NULL sched-domain. [ 24.149549] CPU0 attaching sched-domain: [ 24.149552] domain 0: span 0-1 level SIBLING [ 24.149553] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 24.149556] domain 1: span 0-3 level MC [ 24.149558] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 24.149562] CPU1 attaching sched-domain: [ 24.149563] domain 0: span 0-1 level SIBLING [ 24.149564] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 24.149567] domain 1: span 0-3 level MC [ 24.149568] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 24.149571] CPU2 attaching sched-domain: [ 24.149572] domain 0: span 2-3 level SIBLING [ 24.149573] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 24.149576] domain 1: span 0-3 level MC [ 24.149577] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 24.149580] CPU3 attaching sched-domain: [ 24.149581] domain 0: span 2-3 level SIBLING [ 24.149582] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 24.149585] domain 1: span 0-3 level MC [ 24.149586] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 24.149885] CPU0 attaching NULL sched-domain. [ 24.149886] CPU1 attaching NULL sched-domain. [ 24.149888] CPU2 attaching NULL sched-domain. [ 24.149889] CPU3 attaching NULL sched-domain. [ 24.219409] CPU0 attaching sched-domain: [ 24.219412] domain 0: span 0-1 level SIBLING [ 24.219413] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 24.219416] domain 1: span 0-3 level MC [ 24.219418] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 24.219422] CPU1 attaching sched-domain: [ 24.219423] domain 0: span 0-1 level SIBLING [ 24.219424] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 24.219427] domain 1: span 0-3 level MC [ 24.219428] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 24.219431] CPU2 attaching sched-domain: [ 24.219432] domain 0: span 2-3 level SIBLING [ 24.219433] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 24.219436] domain 1: span 0-3 level MC [ 24.219437] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 24.219440] CPU3 attaching sched-domain: [ 24.219441] domain 0: span 2-3 level SIBLING [ 24.219442] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 24.219445] domain 1: span 0-3 level MC [ 24.219446] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 25.397555] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 27.962109] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 30.486432] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 33.031292] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 35.586970] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 38.143037] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 40.538561] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 42.994300] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 45.419360] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 47.905646] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 50.451622] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 52.866436] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 55.531957] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 58.078525] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 60.642937] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 63.199256] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 65.744121] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 68.308083] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 70.835677] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 73.390587] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 75.786550] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 78.242333] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 80.798570] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 83.394107] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 85.918991] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 88.364551] hub 2-1.4:1.0: connect-debounce failed, port 2 disabled [ 97.030116] usb 2-1.4.2: new low speed USB device using ehci_hcd and address 7 [ 97.142494] usb 2-1.4.2: configuration #1 chosen from 1 choice [ 97.145272] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2:1.0/input/input7 [ 97.145350] generic-usb 0003:04B3:310B.0002: input,hidraw1: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.0-1.4.2/input0 [ 107.049682] tun: Universal TUN/TAP device driver, 1.6 [ 107.049684] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 107.050292] tun0: Disabled Privacy Extensions [ 140.477719] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 140.477722] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance [ 140.477723] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 140.477723] vboxdrv: the usage of hardware performance counters by [ 140.477724] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 140.477726] vboxdrv: Found 4 processor cores. [ 140.477935] VBoxDrv: dbg - g_abExecMemory=ffffffffa02dc400 [ 140.477981] vboxdrv: fAsync=0 offMin=0x3d4 offMax=0x3533 [ 140.478285] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 140.478286] vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001). [ 140.681486] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa047a200 [ 140.683109] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0492aa0 [ 140.722116] ppdev: user-space parallel port driver
