Changes in v2 - Added min() calculation against CONFIG_USB_GADGET_VBUS_DRAW in case of unconfigured state. Currently dwc3 gadget processes the suspend interrupt event only if the device is in configured state. But consider a case where device is not configured and got suspend interrupt, in that case our gadget would still use 100mA as composite_suspend didn't happen. But battery charging specification (BC1.2) expects a downstream device to draw less than 2.5mA when unconnected OR suspended. And while resuming, the gadget can draw upto 100mA if its not configured, but the current implementation of composite_resume doesn't consider the case of unconfigured device. This series addresses the above mentioned issues. Prashanth K (2): usb: dwc3: gadget: Change condition for processing suspend event usb: gadget: composite: Draw 100mA current if not configured drivers/usb/dwc3/gadget.c | 11 ++--------- drivers/usb/gadget/composite.c | 3 +++ 2 files changed, 5 insertions(+), 9 deletions(-) -- 2.7.4