Add support for Microchip USB2517 USB 2.0 hub to the onboard usb hub driver. Adopt the generic usb-device compatible ("usbVID,PID"). This hub has the same reset timings as USB2514, so reuse that one. There is also an USB2517I which just has industrial temperature range. Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> --- drivers/usb/misc/onboard_usb_hub.c | 1 + drivers/usb/misc/onboard_usb_hub.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index 5402e4b7267b..12fc6eb67c3b 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -410,6 +410,7 @@ static const struct usb_device_id onboard_hub_id_table[] = { { USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */ { USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */ { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */ + { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */ diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h index 0a943a154649..aca5f50eb0da 100644 --- a/drivers/usb/misc/onboard_usb_hub.h +++ b/drivers/usb/misc/onboard_usb_hub.h @@ -36,6 +36,7 @@ static const struct onboard_hub_pdata vialab_vl817_data = { static const struct of_device_id onboard_hub_match[] = { { .compatible = "usb424,2514", .data = µchip_usb424_data, }, + { .compatible = "usb424,2517", .data = µchip_usb424_data, }, { .compatible = "usb451,8140", .data = &ti_tusb8041_data, }, { .compatible = "usb451,8142", .data = &ti_tusb8041_data, }, { .compatible = "usb5e3,608", .data = &genesys_gl850g_data, }, -- 2.34.1