Add lan88xx_link_change_notify() to the internal phy driver and move the phy specific register accesses there.
Signed-off-by: Yuiko Oshino <yuiko.oshino@xxxxxxxxxxxxx>
---
drivers/net/phy/microchip.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index ccecee2524ce..0b88635f4fbc 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -342,6 +342,37 @@ static int lan88xx_config_aneg(struct phy_device *phydev)
return genphy_config_aneg(phydev);
}
+static void lan88xx_link_change_notify(struct phy_device *phydev)
+{
+ int temp;
+
+ /* At forced 100 F/H mode, chip may fail to set mode correctly
+ * when cable is switched between long(~50+m) and short one.
+ * As workaround, set to 10 before setting to 100
+ * at forced 100 F/H mode.
+ */
+ if (!phydev->autoneg && phydev->speed == 100) {
+ /* disable phy interrupt */
+ temp = phy_read(phydev, LAN88XX_INT_MASK);
+ temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
+ phy_write(phydev, LAN88XX_INT_MASK, temp);
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
+ phy_write(phydev, MII_BMCR, temp); /* set to 10 first */
+ temp |= BMCR_SPEED100;
+ phy_write(phydev, MII_BMCR, temp); /* set to 100 later */
+
+ /* clear pending interrupt generated while workaround */
+ temp = phy_read(phydev, LAN88XX_INT_STS);
+
+ /* enable phy interrupt back */
+ temp = phy_read(phydev, LAN88XX_INT_MASK);
+ temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
+ phy_write(phydev, LAN88XX_INT_MASK, temp);
+ }
+}
+
static struct phy_driver microchip_phy_driver[] = {
{
.phy_id = 0x0007c132,
@@ -359,6 +390,7 @@ static struct phy_driver microchip_phy_driver[] = {
.config_init = lan88xx_config_init,
.config_aneg = lan88xx_config_aneg,
+ .link_change_notify = lan88xx_link_change_notify,
.config_intr = lan88xx_phy_config_intr,
.handle_interrupt = lan88xx_handle_interrupt,
--
2.17.1
