On Sat, Oct 31, 2009 at 09:52:45PM +0300, Sergei Shtylyov wrote:
> >+static int ulpi_poll(void __iomem *view, u32 bit)
> >+{
> >+ uint32_t data;
> >+ int timeout = 10000;
> >+
> >+ data = __raw_readl(view);
> >+ while (data & bit) {
> >+ if (!timeout--) {
> >+ printk(KERN_WARNING
> >+ "timeout polling for ULPI device\n");
> >+ return -ETIMEDOUT;
> >+ }
> >+
> >+ cpu_relax();
> >+ data = __raw_readl(view);
> >+ }
>
> I'd have done the loop and its exit condition the other way, to
> only call __raw_readl() once... oh well.
Oh well. We're getting there - I'm sure! Really! :)
Daniel
>From 6b9071f7986c6cca54171d841fd27e29c8154e7c Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@xxxxxxxx>
Date: Thu, 25 Jun 2009 13:27:40 +0200
Subject: [PATCH] MXC: Add support for ULPI Viewports
The ARC USB OTG Core has support for accessing ULPI tranceivers
through so called ULPI viewports. Export a set of function for use with
the USB OTG framework.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Daniel Mack <daniel@xxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxx>
Cc: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
---
arch/arm/plat-mxc/Kconfig | 3 +
arch/arm/plat-mxc/Makefile | 1 +
arch/arm/plat-mxc/include/mach/ulpi.h | 7 ++
arch/arm/plat-mxc/ulpi.c | 113 +++++++++++++++++++++++++++++++++
4 files changed, 124 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-mxc/include/mach/ulpi.h
create mode 100644 arch/arm/plat-mxc/ulpi.c
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index ca5c7c2..e8e92cb 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -69,6 +69,9 @@ config MXC_PWM
help
Enable support for the i.MX PWM controller(s).
+config MXC_ULPI
+ bool
+
config ARCH_HAS_RNGA
bool
depends on ARCH_MXC
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index e3212c8..545412f 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
new file mode 100644
index 0000000..96b6ab4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_ULPI_H
+#define __MACH_ULPI_H
+
+extern struct otg_io_access_ops mxc_ulpi_access_ops;
+
+#endif /* __MACH_ULPI_H */
+
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
new file mode 100644
index 0000000..582c6df
--- /dev/null
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@xxxxxxxxxxxxxx>
+ * Copyright 2009 Daniel Mack <daniel@xxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+
+#include <mach/ulpi.h>
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU (1 << 31) /* Wakeup */
+#define ULPIVW_RUN (1 << 30) /* read/write run */
+#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */
+#define ULPIVW_SS (1 << 27) /* SyncState */
+#define ULPIVW_PORT_MASK 0x07 /* Port field */
+#define ULPIVW_PORT_SHIFT 24
+#define ULPIVW_ADDR_MASK 0xff /* data address field */
+#define ULPIVW_ADDR_SHIFT 16
+#define ULPIVW_RDATA_MASK 0xff /* read data field */
+#define ULPIVW_RDATA_SHIFT 8
+#define ULPIVW_WDATA_MASK 0xff /* write data field */
+#define ULPIVW_WDATA_SHIFT 0
+
+static int ulpi_poll(void __iomem *view, u32 bit)
+{
+ int timeout = 10000;
+
+ while (timeout--) {
+ u32 data = __raw_readl(view);
+
+ if (!(data & bit))
+ return 0;
+
+ cpu_relax();
+ };
+
+ printk(KERN_WARNING "timeout polling for ULPI device\n");
+
+ return -ETIMEDOUT;
+}
+
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ /* make sure interface is running */
+ if (!(__raw_readl(view) & ULPIVW_SS)) {
+ __raw_writel(ULPIVW_WU, view);
+
+ /* wait for wakeup */
+ ret = ulpi_poll(view, ULPIVW_WU);
+ if (ret)
+ return ret;
+ }
+
+ /* read the register */
+ __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
+
+ /* wait for completion */
+ ret = ulpi_poll(view, ULPIVW_RUN);
+ if (ret)
+ return ret;
+
+ return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ /* make sure the interface is running */
+ if (!(__raw_readl(view) & ULPIVW_SS)) {
+ __raw_writel(ULPIVW_WU, view);
+ /* wait for wakeup */
+ ret = ulpi_poll(view, ULPIVW_WU);
+ if (ret)
+ return ret;
+ }
+
+ __raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
+ (reg << ULPIVW_ADDR_SHIFT) |
+ ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
+
+ /* wait for completion */
+ return ulpi_poll(view, ULPIVW_RUN);
+}
+
+struct otg_io_access_ops mxc_ulpi_access_ops = {
+ .read = ulpi_read,
+ .write = ulpi_write,
+};
+EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
+
--
1.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
