On 1/6/23 20:56, Krzysztof Kozlowski wrote:
On 05/01/2023 10:28, Macpaul Lin wrote:
1. Enable USB device port (USB port0).
2. Enable u2 speed for other USB HOST (USB port1/2/3).
3. Configure mt6360 (TYPEC) related pinctrls.
Note: Full dual-role switch capability requires TYPEC MUX driver and dts
update will be send in separate patches.
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 51 ++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 07a864cb8b54..207bb5f4c58f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -12,6 +12,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/usb/pd.h>
/ {
model = "MediaTek MT8195 demo board";
@@ -380,6 +381,22 @@
};
};
+ mt6360_pins: mt6360-pins {
+ pins {
+ pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
+ <PINMUX_GPIO101__FUNC_GPIO101>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ u3_p0_vbus: u3_p0vbusdefault {
No underscores in node names. Also does not look correct naming. Please
run `make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Thanks for the suggest.
I'm trying to request IT to setup for the environment for supporting
"make dtbs_check". This should be fix in next patch.
+ pins_cmd_dat {
Same problem.
Got it.
Best regards,
Krzysztof
Thanks!
Macpaul Lin
