Hi Oliver, On Mon, Jan 9, 2023 at 9:02 PM Oliver Neukum <oneukum@xxxxxxxx> wrote: > > > > On 09.01.23 12:55, Juhyung Park wrote: > > This reverts commit e00b488e813f0f1ad9f778e771b7cd2fe2877023. > > > > The commit e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") > > blacklists UAS for the entire RTL9210 enclosures. Realtek's VendorId is 0x0bda > > and RTL9210 enclosures reports 0x9210 for its ProductId. > > > > The RTL9210 controller was advertised with UAS since its release back in 2019 > > and was shipped with a lot of enclosure products with different firmware > > combinations. > > > > If UAS blacklisting is really required said product (Hiksemi USB3-FW), it > > should be done without blacklisting the entire RTL9210 products. > > Hi, > > I see this the issue. Do you have an idea how to limit the scope. Unfortunately, no. This might be the ugly case where, if a proper workaround could be found (if the original report is valid at all), it may change the code logic itself with some if branch rather than just unusual_uas.h. With my RTL9210 enclosure, using multiple different firmware versions still reports the same bcdDevice. Note that, despite Hongling reporting that Windows doesn't use UAS in https://lore.kernel.org/all/fbeffee7-3ac5-4798-14b0-724e0ed01947@xxxxxxx/ , Windows uses it on mine and respectively trim works. > > Hongling Zeng, do you have an idea, respectively if not, could > you provide "lsusb -v" for the defective device? > Hongling didn't respond to Greg when he asked the same question back in November: https://lore.kernel.org/all/Y29RtXGcey6V9iTY@xxxxxxxxx/ Anyways, here's my lsusb -v output. Hope it helps: Bus 004 Device 002: ID 0bda:9210 Realtek Semiconductor Corp. RTL9210 M.2 NVME Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0x9210 RTL9210 M.2 NVME Adapter bcdDevice 20.01 iManufacturer 1 Realtek iProduct 2 RTL9210 iSerial 3 012345678906 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0079 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 896mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 4 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 98 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Data-in pipe (0x03) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Data-out pipe (0x04) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Status pipe (0x02) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Command pipe (0x01) Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x003e bNumDeviceCaps 4 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000006 BESL Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 2047 micro seconds SuperSpeedPlus USB Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x00000001 Sublink Speed Attribute count 1 Sublink Speed ID count 0 wFunctionalitySupport 0x1100 bmSublinkSpeedAttr[0] 0x000a4030 Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[1] 0x000a40b0 Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {03020100-0504-0706-0002-020200020202} Device Status: 0x0000 (Bus Powered) > Regards > Oliver