Change the constant SCHEDULE_SLOP to be 80 microframes, instead of 10
frames. It was always multiplied by 8 to convert frames to microframes.
SCHEDULE_SLOP is only used in ehci-sched.c.
Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
---
Final patch resend.
drivers/usb/host/ehci-sched.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index b25cdea..9fa5614 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1373,7 +1373,7 @@ sitd_slot_ok (
* given EHCI_TUNE_FLS and the slop). Or, write a smarter scheduler!
*/
-#define SCHEDULE_SLOP 10 /* frames */
+#define SCHEDULE_SLOP 80 /* microframes */
static int
iso_stream_schedule (
@@ -1387,7 +1387,7 @@ iso_stream_schedule (
unsigned mod = ehci->periodic_size << 3;
struct ehci_iso_sched *sched = urb->hcpriv;
- if (sched->span > (mod - 8 * SCHEDULE_SLOP)) {
+ if (sched->span > (mod - SCHEDULE_SLOP)) {
ehci_dbg (ehci, "iso request %p too long\n", urb);
status = -EFBIG;
goto fail;
@@ -1420,7 +1420,7 @@ iso_stream_schedule (
start += mod;
/* Fell behind (by up to twice the slop amount)? */
- if (start >= max - 2 * 8 * SCHEDULE_SLOP)
+ if (start >= max - 2 * SCHEDULE_SLOP)
start += period * DIV_ROUND_UP(
max - start, period) - mod;
@@ -1439,7 +1439,7 @@ iso_stream_schedule (
* can also help high bandwidth if the dma and irq loads don't
* jump until after the queue is primed.
*/
- start = SCHEDULE_SLOP * 8 + (now & ~0x07);
+ start = SCHEDULE_SLOP + (now & ~0x07);
start %= mod;
stream->next_uframe = start;
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
