Signed-off-by: Bart Hartgers <bart.hartgers@xxxxxxxxx>
---
Index: linux-2.6.32-rc4/drivers/usb/serial/ark3116.c
===================================================================
--- linux-2.6.32-rc4.orig/drivers/usb/serial/ark3116.c 2009-10-18 16:20:02.000000000 +0200
+++ linux-2.6.32-rc4/drivers/usb/serial/ark3116.c 2009-10-18 16:20:13.000000000 +0200
@@ -526,32 +526,21 @@ static int ark3116_ioctl(struct tty_stru
static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
- struct usb_serial *serial = port->serial;
- char *buf;
- char temp;
-
- /* seems like serial port status info (RTS, CTS, ...) is stored
- * in reg(?) 0x0006
- * pcb connection point 11 = GND -> sets bit4 of response
- * pcb connection point 7 = GND -> sets bit6 of response
- */
-
- buf = kmalloc(1, GFP_KERNEL);
- if (!buf) {
- dbg("error kmalloc");
- return -ENOMEM;
- }
-
- /* read register */
- ARK3116_RCV_QUIET(serial, 0xFE, 0xC0, 0x0000, 0x0006, buf);
- temp = buf[0];
- kfree(buf);
-
- /* i do not really know if bit4=CTS and bit6=DSR... just a
- * quick guess!
- */
- return (temp & (1<<4) ? TIOCM_CTS : 0)
- | (temp & (1<<6) ? TIOCM_DSR : 0);
+ struct ark3116_private *priv = usb_get_serial_port_data(port);
+
+ /* read modem status */
+ unsigned status = atomic_read(&priv->msr);
+ /* modem control is output */
+ unsigned ctrl = atomic_read(&priv->mcr);
+
+ return (status & UART_MSR_DSR ? TIOCM_DSR : 0) |
+ (status & UART_MSR_CTS ? TIOCM_CTS : 0) |
+ (status & UART_MSR_RI ? TIOCM_RI : 0) |
+ (status & UART_MSR_DCD ? TIOCM_CD : 0) |
+ (ctrl & UART_MCR_DTR ? TIOCM_DTR : 0) |
+ (ctrl & UART_MCR_RTS ? TIOCM_RTS : 0) |
+ (ctrl & UART_MCR_OUT1 ? TIOCM_OUT1 : 0) |
+ (ctrl & UART_MCR_OUT2 ? TIOCM_OUT2 : 0);
}
static struct usb_driver ark3116_driver = {
--
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
