Re: [PATCH v2] dt-bindings: usb: tegra-xusb: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 07, 2022 at 01:52:21PM -0600, Rob Herring wrote:
> On Thu, Nov 03, 2022 at 03:42:00PM +0100, Thierry Reding wrote:
> > From: Thierry Reding <treding@xxxxxxxxxx>
> > 
> > Convert the Tegra XUSB controller bindings from the free-form text
> > format to json-schema.
> > 
> > Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> > ---
> > Wayne, going forward it might make sense for you to pick this up into
> > your Tegra234 series and add the Tegra234 bindings on top of this.
> > 
> > Changes in v2:
> > - use minItems/maxItems/items instead of contains/anyOf for phy-names
> > - add missing compatible string to USB device example
> > - drop unneeded phys property description
> > - drop unneeded USB bus properties
> > - add reference to usb-xhci.yaml
> > 
> >  .../bindings/usb/nvidia,tegra124-xusb.txt     | 132 -----------
> >  .../bindings/usb/nvidia,tegra124-xusb.yaml    | 202 +++++++++++++++++
> >  .../bindings/usb/nvidia,tegra186-xusb.yaml    | 181 +++++++++++++++
> >  .../bindings/usb/nvidia,tegra194-xusb.yaml    | 187 ++++++++++++++++
> >  .../bindings/usb/nvidia,tegra210-xusb.yaml    | 207 ++++++++++++++++++
> >  5 files changed, 777 insertions(+), 132 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
> >  create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml
> >  create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml
> >  create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml
> >  create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
> > deleted file mode 100644
> > index 5bfcc0b4d6b9..000000000000
> > --- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
> > +++ /dev/null
> > @@ -1,132 +0,0 @@
> > -NVIDIA Tegra xHCI controller
> > -============================
> > -
> > -The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by
> > -the Tegra XUSB pad controller.
> > -
> > -Required properties:
> > ---------------------
> > -- compatible: Must be:
> > -  - Tegra124: "nvidia,tegra124-xusb"
> > -  - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
> > -  - Tegra210: "nvidia,tegra210-xusb"
> > -  - Tegra186: "nvidia,tegra186-xusb"
> > -- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
> > -  registers and XUSB IPFS registers.
> > -- reg-names: Must contain the following entries:
> > -  - "hcd"
> > -  - "fpci"
> > -  - "ipfs"
> > -- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt.
> > -- clocks: Must contain an entry for each entry in clock-names.
> > -  See ../clock/clock-bindings.txt for details.
> > -- clock-names: Must include the following entries:
> > -   - xusb_host
> > -   - xusb_host_src
> > -   - xusb_falcon_src
> > -   - xusb_ss
> > -   - xusb_ss_src
> > -   - xusb_ss_div2
> > -   - xusb_hs_src
> > -   - xusb_fs_src
> > -   - pll_u_480m
> > -   - clk_m
> > -   - pll_e
> > -- resets: Must contain an entry for each entry in reset-names.
> > -  See ../reset/reset.txt for details.
> > -- reset-names: Must include the following entries:
> > -  - xusb_host
> > -  - xusb_ss
> > -  - xusb_src
> > -  Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src.
> > -- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to
> > -  configure the USB pads used by the XHCI controller
> > -
> > -For Tegra124 and Tegra132:
> > -- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
> > -- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
> > -- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
> > -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
> > -- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
> > -- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
> > -- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
> > -- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V.
> > -
> > -For Tegra210:
> > -- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
> > -- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
> > -- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
> > -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
> > -- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
> > -- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
> > -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
> > -
> > -For Tegra210 and Tegra186:
> > -- power-domains: A list of PM domain specifiers that reference each power-domain
> > -  used by the xHCI controller. This list must comprise of a specifier for the
> > -  XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
> > -  ../arm/tegra/nvidia,tegra20-pmc.txt for details.
> > -- power-domain-names: A list of names that represent each of the specifiers in
> > -  the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
> > -  represent the power-domains XUSBA and XUSBC, respectively. See
> > -  ../power/power_domain.txt for details.
> > -
> > -Optional properties:
> > ---------------------
> > -- phys: Must contain an entry for each entry in phy-names.
> > -  See ../phy/phy-bindings.txt for details.
> > -- phy-names: Should include an entry for each PHY used by the controller. The
> > -  following PHYs are available:
> > -  - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
> > -  - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
> > -  - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
> > -              usb3-3
> > -  - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2
> > -
> > -Example:
> > ---------
> > -
> > -	usb@0,70090000 {
> > -		compatible = "nvidia,tegra124-xusb";
> > -		reg = <0x0 0x70090000 0x0 0x8000>,
> > -		      <0x0 0x70098000 0x0 0x1000>,
> > -		      <0x0 0x70099000 0x0 0x1000>;
> > -		reg-names = "hcd", "fpci", "ipfs";
> > -
> > -		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> > -			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > -
> > -		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
> > -			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
> > -			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
> > -			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
> > -			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
> > -			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
> > -			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
> > -			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
> > -			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
> > -			 <&tegra_car TEGRA124_CLK_CLK_M>,
> > -			 <&tegra_car TEGRA124_CLK_PLL_E>;
> > -		clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
> > -			      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
> > -			      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
> > -			      "clk_m", "pll_e";
> > -		resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
> > -		reset-names = "xusb_host", "xusb_ss", "xusb_src";
> > -
> > -		nvidia,xusb-padctl = <&padctl>;
> > -
> > -		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
> > -		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
> > -		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
> > -		phy-names = "usb2-1", "usb2-2", "usb3-0";
> > -
> > -		avddio-pex-supply = <&vdd_1v05_run>;
> > -		dvddio-pex-supply = <&vdd_1v05_run>;
> > -		avdd-usb-supply = <&vdd_3v3_lp0>;
> > -		avdd-pll-utmip-supply = <&vddio_1v8>;
> > -		avdd-pll-erefe-supply = <&avdd_1v05_run>;
> > -		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
> > -		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
> > -		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
> > -	};
> > diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml
> > new file mode 100644
> > index 000000000000..4a6616bf9bab
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml
> > @@ -0,0 +1,202 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NVIDIA Tegra124 xHCI controller
> > +
> > +maintainers:
> > +  - Thierry Reding <thierry.reding@xxxxxxxxx>
> > +  - Jon Hunter <jonathanh@xxxxxxxxxx>
> > +
> > +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
> > +  exposed by the Tegra XUSB pad controller.
> > +
> > +properties:
> > +  # required
> > +  compatible:
> > +    oneOf:
> > +      - description: NVIDIA Tegra124
> > +        const: nvidia,tegra124-xusb
> > +
> > +      - description: NVIDIA Tegra132
> > +        items:
> > +          - const: nvidia,tegra132-xusb
> > +          - const: nvidia,tegra124-xusb
> > +
> > +  reg:
> > +    items:
> > +      - description: base and length of the xHCI host registers
> > +      - description: base and length of the XUSB FPCI registers
> > +      - description: base and length of the XUSB IPFS registers
> > +
> > +  reg-names:
> > +    items:
> > +      - const: hcd
> > +      - const: fpci
> > +      - const: ipfs
> > +
> > +  interrupts:
> > +    items:
> > +      - description: xHCI host interrupt
> > +      - description: mailbox interrupt
> > +
> > +  clocks:
> > +    items:
> > +      - description: XUSB host clock
> > +      - description: XUSB host source clock
> > +      - description: XUSB Falcon source clock
> > +      - description: XUSB SuperSpeed clock
> > +      - description: XUSB SuperSpeed clock divider
> > +      - description: XUSB SuperSpeed source clock
> > +      - description: XUSB HighSpeed clock source
> > +      - description: XUSB FullSpeed clock source
> > +      - description: USB PLL
> > +      - description: reference clock
> > +      - description: I/O PLL
> > +
> > +  clock-names:
> > +    items:
> > +      - const: xusb_host
> > +      - const: xusb_host_src
> > +      - const: xusb_falcon_src
> > +      - const: xusb_ss
> > +      - const: xusb_ss_div2
> > +      - const: xusb_ss_src
> > +      - const: xusb_hs_src
> > +      - const: xusb_fs_src
> > +      - const: pll_u_480m
> > +      - const: clk_m
> > +      - const: pll_e
> > +
> > +  resets:
> > +    items:
> > +      - description: reset for the XUSB host controller
> > +      - description: reset for the SuperSpeed logic
> > +      - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
> > +
> > +  reset-names:
> > +    items:
> > +      - const: xusb_host
> > +      - const: xusb_ss
> > +      - const: xusb_src
> > +
> > +  nvidia,xusb-padctl:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: phandle to the XUSB pad controller that is used to configure
> > +      the USB pads used by the XHCI controller
> > +
> > +  # optional
> > +  phys:
> > +    minItems: 1
> > +    maxItems: 7
> > +
> > +  phy-names:
> > +    minItems: 1
> > +    maxItems: 7
> > +    items:
> > +      enum:
> > +        - usb2-0
> > +        - usb2-1
> > +        - usb2-2
> > +        - hsic-0
> > +        - hsic-1
> > +        - usb3-0
> > +        - usb3-1
> > +
> > +  avddio-pex-supply:
> > +    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
> > +
> > +  dvddio-pex-supply:
> > +    description: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
> > +
> > +  avdd-usb-supply:
> > +    description: USB controller power supply. Must supply 3.3 V.
> > +
> > +  avdd-pll-utmip-supply:
> > +    description: UTMI PLL power supply. Must supply 1.8 V.
> > +
> > +  avdd-pll-erefe-supply:
> > +    description: PLLE reference PLL power supply. Must supply 1.05 V.
> > +
> > +  avdd-usb-ss-pll-supply:
> > +    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
> > +
> > +  hvdd-usb-ss-supply:
> > +    description: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
> > +
> > +  hvdd-usb-ss-pll-e-supply:
> > +    description: High-voltage PLLE power supply. Must supply 3.3 V.
> > +
> > +allOf:
> > +  - $ref: usb-xhci.yaml
> > +
> > +unevaluatedProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +  - reset-names
> > +  - nvidia,xusb-padctl
> > +  - phys
> > +  - phy-names
> > +  - avddio-pex-supply
> > +  - dvddio-pex-supply
> > +  - avdd-usb-supply
> > +  - hvdd-usb-ss-supply
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/tegra124-car.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    usb@70090000 {
> > +        compatible = "nvidia,tegra124-xusb";
> > +        reg = <0x70090000 0x8000>,
> > +              <0x70098000 0x1000>,
> > +              <0x70099000 0x1000>;
> > +        reg-names = "hcd", "fpci", "ipfs";
> > +
> > +        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
> > +                 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
> > +                 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
> > +                 <&tegra_car TEGRA124_CLK_XUSB_SS>,
> > +                 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
> > +                 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
> > +                 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
> > +                 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
> > +                 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
> > +                 <&tegra_car TEGRA124_CLK_CLK_M>,
> > +                 <&tegra_car TEGRA124_CLK_PLL_E>;
> > +        clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
> > +                      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
> > +                      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
> > +                      "clk_m", "pll_e";
> > +        resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
> > +        reset-names = "xusb_host", "xusb_ss", "xusb_src";
> > +
> > +        nvidia,xusb-padctl = <&padctl>;
> > +
> > +        phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
> > +               <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
> > +               <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
> > +        phy-names = "usb2-1", "usb2-2", "usb3-0";
> > +
> > +        avddio-pex-supply = <&vdd_1v05_run>;
> > +        dvddio-pex-supply = <&vdd_1v05_run>;
> > +        avdd-usb-supply = <&vdd_3v3_lp0>;
> > +        avdd-pll-utmip-supply = <&vddio_1v8>;
> > +        avdd-pll-erefe-supply = <&avdd_1v05_run>;
> > +        avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
> > +        hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
> > +        hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
> > +    };
> > diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml
> > new file mode 100644
> > index 000000000000..7126d137133a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml
> > @@ -0,0 +1,181 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NVIDIA Tegra186 xHCI controller
> > +
> > +maintainers:
> > +  - Thierry Reding <thierry.reding@xxxxxxxxx>
> > +  - Jon Hunter <jonathanh@xxxxxxxxxx>
> > +
> > +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
> > +  exposed by the Tegra XUSB pad controller.
> > +
> > +properties:
> > +  compatible:
> > +    const: nvidia,tegra186-xusb
> > +
> > +  reg:
> > +    items:
> > +      - description: base and length of the xHCI host registers
> > +      - description: base and length of the XUSB FPCI registers
> > +
> > +  reg-names:
> > +    items:
> > +      - const: hcd
> > +      - const: fpci
> > +
> > +  interrupts:
> > +    items:
> > +      - description: xHCI host interrupt
> > +      - description: mailbox interrupt
> > +
> > +  clocks:
> > +    items:
> > +      - description: XUSB host clock
> > +      - description: XUSB Falcon source clock
> > +      - description: XUSB SuperSpeed clock
> > +      - description: XUSB SuperSpeed source clock
> > +      - description: XUSB HighSpeed clock source
> > +      - description: XUSB FullSpeed clock source
> > +      - description: USB PLL
> > +      - description: reference clock
> > +      - description: I/O PLL
> > +
> > +  clock-names:
> > +    items:
> > +      - const: xusb_host
> > +      - const: xusb_falcon_src
> > +      - const: xusb_ss
> > +      - const: xusb_ss_src
> > +      - const: xusb_hs_src
> > +      - const: xusb_fs_src
> > +      - const: pll_u_480m
> > +      - const: clk_m
> > +      - const: pll_e
> > +
> > +  interconnects:
> > +    items:
> > +      - description: read client
> > +      - description: write client
> > +
> > +  interconnect-names:
> > +    items:
> > +      - const: dma-mem # read
> > +      - const: write
> > +
> > +  iommus:
> > +    maxItems: 1
> > +
> > +  nvidia,xusb-padctl:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: phandle to the XUSB pad controller that is used to configure
> > +      the USB pads used by the XHCI controller
> > +
> > +  phys:
> > +    minItems: 1
> > +    maxItems: 7
> > +
> > +  phy-names:
> > +    minItems: 1
> > +    maxItems: 7
> > +    items:
> > +      enum:
> > +        - usb2-0
> > +        - usb2-1
> > +        - usb2-2
> > +        - hsic-0
> > +        - usb3-0
> > +        - usb3-1
> > +        - usb3-2
> > +
> > +  power-domains:
> > +    description: A list of PM domain specifiers that reference each power-
> > +      domain used by the xHCI controller. This list must comprise of a
> > +      specifier for the XUSBA and XUSBC power-domains.
> > +
> > +      See ../power/power_domain.txt and ../arm/tegra/nvidia,tegra20-pmc.txt
> > +      for details.
> 
> Drop description.
> 
> > +    items:
> > +      - description: XUSBC power domain
> > +      - description: XUSBA power domain
> > +
> > +  power-domain-names:
> > +    description: A list of names that represent each of the specifiers in the
> > +      'power-domains' property. See ../power/power_domain.txt for details.
> 
> ditto
> 
> And the same elsewhere.

All of these descriptions are now dropped.

> 
> > +    items:
> > +      - const: xusb_host
> > +      - const: xusb_ss
> 
> host/XUSBC and ss/XUSBA don't really correlate. It's all supposed to be 
> named relative to the device rather than top-level/source/provider. 
> You're stuck with the host/ss names, so maybe improve the descriptions.
> 
> With those fixes,
> 
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

I've updated the descriptions to clarify that XUSBC is for host and USB
2.0 while XUSBA is for SuperSpeed.

I've picked this up into the Tegra tree with the above modifications.

Thanks,
Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux