The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves some resources from port 2's PHY and HCI IP. In particular the PMU clock for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL register of port 2. To allow each USB port to be controlled independently of port 2, we need a handle to that particular PMU clock in the *PHY* node, as the HCI and PHY part might be handled by separate drivers. Add that clock to the requirements of the H616 PHY binding, so that a PHY driver can apply the quirk in isolation, without requiring help from port 2's HCI driver. Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> --- .../phy/allwinner,sun8i-h3-usb-phy.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml index e288450e0844..3a3168392597 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml @@ -36,18 +36,22 @@ properties: - const: pmu3 clocks: + minItems: 4 items: - description: USB OTG PHY bus clock - description: USB Host 0 PHY bus clock - description: USB Host 1 PHY bus clock - description: USB Host 2 PHY bus clock + - description: PMU clock for host port 2 clock-names: + minItems: 4 items: - const: usb0_phy - const: usb1_phy - const: usb2_phy - const: usb3_phy + - const: pmu2_clk resets: items: @@ -98,6 +102,21 @@ required: additionalProperties: false +if: + properties: + compatible: + contains: + enum: + - sun50i-h616-usb-phy + +then: + properties: + clocks: + minItems: 5 + + clock-names: + minItems: 5 + examples: - | #include <dt-bindings/gpio/gpio.h> -- 2.35.3