Hi Krzysztof, Am Freitag, 15. Juli 2022, 10:17:31 CEST schrieb Krzysztof Kozlowski: > On 15/07/2022 09:32, Alexander Stein wrote: > > The TI USB8041 is a USB 3.0 hub controller with 4 ports. > > > > This initial version of the binding only describes USB related aspects > > of the USB8041, it does not cover the option of connecting the controller > > as an i2c slave. > > > > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> > > --- > > Changes in v2: > > * Removed 'items' from compatible, it's just en enum now > > * Rename reset-gpio to reset-gpios > > * Use 'items' for reset-gpios > > * Adjust description of vdd-supply > > * Sorted required list > > * Adjusted example > > > > .../devicetree/bindings/usb/ti,usb8041.yaml | 67 +++++++++++++++++++ > > 1 file changed, 67 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > > > diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml new file mode > > 100644 > > index 000000000000..7fe7416e2b51 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml > > @@ -0,0 +1,67 @@ > > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Binding for the TI USB8041 USB 3.0 hub controller > > + > > +maintainers: > > + - Matthias Kaehlcke <mka@xxxxxxxxxxxx> > > + > > +allOf: > > + - $ref: usb-device.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - usb451,8140 > > + - usb451,8142 > > + > > + reg: true > > + > > + reset-gpios: > > + items: > > + - description: GPIO specifier for GRST# pin. > > + > > + vdd-supply: > > + description: > > + "VDD power supply to the hub" > > No quotes needed. Fixed, thanks. Regards, Alexander
