Re: Re: [PATCH v2 1/3] dt-bindings: usb: Add binding for TI USB8041 hub controller

[Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>]

Hi Matthias,

Am Samstag, 16. Juli 2022, 01:53:12 CEST schrieb Matthias Kaehlcke:
> On Fri, Jul 15, 2022 at 09:32:58AM +0200, Alexander Stein wrote:
> > The TI USB8041 is a USB 3.0 hub controller with 4 ports.
> > 
> > This initial version of the binding only describes USB related aspects
> > of the USB8041, it does not cover the option of connecting the controller
> > as an i2c slave.
> > 
> > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> > ---
> > Changes in v2:
> > * Removed 'items' from compatible, it's just en enum now
> > * Rename reset-gpio to reset-gpios
> > * Use 'items' for reset-gpios
> > * Adjust description of vdd-supply
> > * Sorted required list
> > * Adjusted example
> > 
> >  .../devicetree/bindings/usb/ti,usb8041.yaml   | 67 +++++++++++++++++++
> >  1 file changed, 67 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> > b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml new file mode
> > 100644
> > index 000000000000..7fe7416e2b51
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> > @@ -0,0 +1,67 @@
> > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Binding for the TI USB8041 USB 3.0 hub controller
> > +
> > +maintainers:
> > +  - Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> 
> Not sure this should be me, just because I'm the author/maintainer of
> the onboard_usb_hub driver, which may be used for this hub.

Sure, if you are uncomfortable I'll add myself here.

Regards,
Alexander

> > +
> > +allOf:
> > +  - $ref: usb-device.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - usb451,8140
> > +      - usb451,8142
> > +
> > +  reg: true
> > +
> > +  reset-gpios:
> > +    items:
> > +      - description: GPIO specifier for GRST# pin.
> > +
> > +  vdd-supply:
> > +    description:
> > +      "VDD power supply to the hub"
> > +
> > +  peer-hub:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      phandle to the peer hub on the controller.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - peer-hub
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    usb {
> > +        dr_mode = "host";
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        /* 2.0 hub on port 1 */
> > +        hub_2_0: hub@1 {
> > +          compatible = "usb451,8142";
> > +          reg = <1>;
> > +          peer-hub = <&hub_3_0>;
> > +          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> > +        };
> > +
> > +        /* 3.0 hub on port 2 */
> > +        hub_3_0: hub@2 {
> > +          compatible = "usb451,8140";
> > +          reg = <2>;
> > +          peer-hub = <&hub_2_0>;
> > +          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> > +        };
> > +    };