On 6/22/2022 8:07 PM, Fabrice Gasnier wrote:
> From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
>
> When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is
> cleared, whatever the vbus valid signal state is. The pull-up should not
> be set when vbus isn't present (this is determined by the drd controller).
>
> This patch ensures that B-Session (so Peripheral role + vbus valid signal)
> is valid before clearing the DCTL_SFTDISCON bit when role switch is used.
> Keep original behavior when usb-role-switch isn't used.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
> ---
> drivers/usb/dwc2/gadget.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index fe2a58c758610..8b15742d9e8aa 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -3594,7 +3594,8 @@ void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
> void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg)
> {
> /* remove the soft-disconnect and let's go */
> - dwc2_clear_bit(hsotg, DCTL, DCTL_SFTDISCON);
> + if (!hsotg->role_sw || (dwc2_readl(hsotg, GOTGCTL) & GOTGCTL_BSESVLD))
> + dwc2_clear_bit(hsotg, DCTL, DCTL_SFTDISCON);
> }
>
> /**
