Li Jun wrote:
> Some SoC(e.g NXP imx8MQ) may have a wrong default power down scale
> setting so need init it to be the correct value, the power down
> scale setting description in DWC3 databook:
>
> Power Down Scale (PwrDnScale)
> The USB3 suspend_clk input replaces pipe3_rx_pclk as a clock source to
> a small part of the USB3 core that operates when the SS PHY is in its
> lowest power (P3) state, and therefore does not provide a clock.
> The Power Down Scale field specifies how many suspend_clk periods fit
> into a 16 kHz clock period. When performing the division, round up the
> remainder.
> For example, when using an 8-bit/16-bit/32-bit PHY and 25-MHz Suspend
> clock,
> Power Down Scale = 25000 kHz/16 kHz = 13'd1563 (rounder up)
>
> So use the suspend clock rate to calculate it.
>
> Signed-off-by: Li Jun <jun.li@xxxxxxx>
> ---
> drivers/usb/dwc3/core.c | 22 ++++++++++++++++++++++
> drivers/usb/dwc3/core.h | 1 +
> 2 files changed, 23 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index e027c0420dc3..16d441dbc28b 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1029,6 +1029,25 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
> dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, cfg);
> }
>
> +static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)
> +{
> + u32 reg, scale;
Can we declare these variables in separate lines? Preferably reverse
Christmas tree style.
> +
> + if (!dwc->susp_clk)
> + return;
> +
> + /*
> + * The power down scale field specifies how many suspend_clk
> + * periods fit into a 16KHz clock period. When performing
> + * the division, round up the remainder.
> + */
> + scale = DIV_ROUND_UP(clk_get_rate(dwc->susp_clk), 16384);
16kHz == 16000Hz right?
> + reg = dwc3_readl(dwc->regs, DWC3_GCTL);
> + reg &= ~(DWC3_GCTL_PWRDNSCALE_MASK);
> + reg |= DWC3_GCTL_PWRDNSCALE(scale);
> + dwc3_writel(dwc->regs, DWC3_GCTL, reg);
> +}
> +
> /**
> * dwc3_core_init - Low-level initialization of DWC3 Core
> * @dwc: Pointer to our controller context structure
> @@ -1105,6 +1124,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
> if (ret)
> goto err1;
>
> + /* Set power down scale of suspend_clk */
> + dwc3_set_power_down_clk_scale(dwc);
> +
> /* Adjust Frame Length */
> dwc3_frame_length_adjustment(dwc);
>
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 81c486b3941c..722808d8c0af 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -231,6 +231,7 @@
>
> /* Global Configuration Register */
> #define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19)
> +#define DWC3_GCTL_PWRDNSCALE_MASK GENMASK(31, 19)
> #define DWC3_GCTL_U2RSTECN BIT(16)
> #define DWC3_GCTL_RAMCLKSEL(x) (((x) & DWC3_GCTL_CLK_MASK) << 6)
> #define DWC3_GCTL_CLK_BUS (0)
Thanks,
Thinh
