From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx> Add device tree bindings for SNPS phy tuning parameters. Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx> --- .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 1ce251d..6c2ecdd 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -53,6 +53,93 @@ properties: vdda33-supply: description: phandle to the regulator 3.3V supply node. + qcom,hs-disconnect-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the voltage level for the threshold used to + detect a disconnect event at the host. Possible values are. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,squelch-detector-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the voltage level for the threshold used to + detect valid high-speed data. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,hs-amplitude-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the high-speed DC level voltage. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,pre-emphasis-duration-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This signal controls the duration for which the + HS pre-emphasis current is sourced onto DP<#> or DM<#>. + The HS Transmitter pre-emphasis duration is defined in terms of + unit amounts. One unit of pre-emphasis duration is approximately + 650 ps and is defined as 1X pre-emphasis duration. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,pre-emphasis-amplitude-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This signal controls the amount of current sourced to + DP<#> and DM<#> after a J-to-K or K-to-J transition. + The HS Transmitter pre-emphasis current is defined in terms of unit + amounts. One unit amount is approximately 2 mA and is defined as + 1X pre-emphasis current. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,hs-rise-fall-time-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the rise/fall times of the high-speed waveform. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,hs-crossover-voltage: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the voltage at which the DP<#> and DM<#> + signals cross while transmitting in HS mode. + The values defined are in milli volts. The hardware accepts only + discrete values. The value closest to the provided input will be + chosen as the override value for this param. + + qcom,hs-output-impedance: + $ref: /schemas/types.yaml#/definitions/int32 + description: + In some applications, there can be significant series resistance + on the D+ and D- paths between the transceiver and cable. This adjusts + the driver source impedance to compensate for added series + resistance on the USB. The values defined are in milliohms. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,ls-fs-output-impedance-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the low- and full-speed single-ended source + impedance while driving high. The following adjustment values are based + on nominal process, voltage, and temperature. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + required: - compatible - reg -- 2.7.4