smsc95xx_reset() resets the PHY behind the PHY driver's back, which seems like a bad idea generally. Remove that portion of the function. We're about to use PHY interrupts instead of polling to detect link changes on SMSC LAN95xx chips. Because smsc95xx_reset() is called from usbnet_open(), PHY interrupt settings are lost whenever the net_device is brought up. There are two other callers of smsc95xx_reset(), namely smsc95xx_bind() and smsc95xx_reset_resume(), and both may indeed benefit from a PHY reset. However they already perform one through their calls to phy_connect_direct() and phy_init_hw(). Tested-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@xxxxxxxxx> # LAN9514 Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx> Cc: Martyn Welch <martyn.welch@xxxxxxxxxxxxx> Cc: Gabriel Hojda <ghojda@xxxxxxxxx> --- drivers/net/usb/smsc95xx.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 2cb44d65bbc3..6c37c7adde1b 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -887,24 +887,6 @@ static int smsc95xx_reset(struct usbnet *dev) return ret; } - ret = smsc95xx_write_reg(dev, PM_CTRL, PM_CTL_PHY_RST_); - if (ret < 0) - return ret; - - timeout = 0; - do { - msleep(10); - ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf); - if (ret < 0) - return ret; - timeout++; - } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100)); - - if (timeout >= 100) { - netdev_warn(dev->net, "timeout waiting for PHY Reset\n"); - return ret; - } - ret = smsc95xx_set_mac_address(dev); if (ret < 0) return ret; -- 2.35.2