Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and SNPS HS PHY on SDX65. Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx> --- arch/arm/boot/dts/qcom-sdx65.dtsi | 83 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index d989837..a64be20 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -126,6 +126,7 @@ reg = <0x00100000 0x001f7400>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; }; @@ -139,6 +140,45 @@ status = "disabled"; }; + usb_hsphy: phy@ff4000 { + compatible = "qcom,usb-snps-hs-7nm-phy"; + reg = <0xff4000 0x120>; + #phy-cells = <0>; + status = "disabled"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx65-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1c8>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_EN>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3PHY_PHY_BCR>, + <&gcc GCC_USB3_PHY_BCR>; + reset-names = "phy", "common"; + + usb_ssphy: phy@ff6200 { + reg = <0x00ff6e00 0x160>, + <0x00ff7000 0x1ec>, + <0x00ff6200 0x1e00>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + system_noc: interconnect@1620000 { compatible = "qcom,sdx65-system-noc"; reg = <0x1620000 0x31200>; @@ -178,6 +218,49 @@ status = "disabled"; }; + usb: usb@a6f8800 { + compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 19 IRQ_TYPE_EDGE_BOTH>, + <&pdc 76 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 18 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "ss_phy_irq", "dm_hs_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + spmi_bus: qcom,spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0xd00>, -- 2.7.4