Hi Mathias, Felipe, > -----Original Message----- > From: Sandeep Maheswaram (Temp) (QUIC) <quic_c_sanm@xxxxxxxxxxx> > Sent: Thursday, April 7, 2022 3:01 PM > To: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Felipe Balbi > <balbi@xxxxxxxxxx>; Stephen Boyd <swboyd@xxxxxxxxxxxx>; Doug > Anderson <dianders@xxxxxxxxxxxx>; Matthias Kaehlcke > <mka@xxxxxxxxxxxx>; Mathias Nyman <mathias.nyman@xxxxxxxxx> > Cc: linux-arm-msm@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; Pavan Kumar Kondeti (QUIC) > <quic_pkondeti@xxxxxxxxxxx>; Pratham Pratap (QUIC) > <quic_ppratap@xxxxxxxxxxx>; Krishna Kurapati PSSNV (QUIC) > <quic_kriskura@xxxxxxxxxxx>; Vidya Sagar Pulyala (Temp) (QUIC) > <quic_vpulyala@xxxxxxxxxxx>; Sandeep Maheswaram (Temp) (QUIC) > <quic_c_sanm@xxxxxxxxxxx> > Subject: [PATCH v3 0/2] Skip phy initialization for DWC3 USB Controllers > > Runtime suspend of phy drivers was failing from DWC3 driver as runtime > usage value is 2 because the phy is initialized from > DWC3 core and HCD core. > Some controllers like DWC3 and CDNS3 manage phy in their core drivers. > This property can be set to avoid phy initialization in HCD core. > > v3: > Coming back to this series based on discussion at below thread > https://patchwork.kernel.org/project/linux-arm-msm/patch/1648103831- > 12347-4-git-send-email-quic_c_sanm@xxxxxxxxxxx/ > Dropped the dt bindings PATCH 1/3 in v2 > https://patchwork.kernel.org/project/linux-arm-msm/cover/1636353710- > 25582-1-git-send-email-quic_c_sanm@xxxxxxxxxxx/ > > v2: > Updated the commit descriptions. > Changed subject prefix from dwc to dwc3. > Increased props array size. > > Sandeep Maheswaram (2): > usb: host: xhci-plat: Add device property to set XHCI_SKIP_PHY_INIT > quirk > usb: dwc3: host: Set the property usb-skip-phy-init > > drivers/usb/dwc3/host.c | 4 +++- > drivers/usb/host/xhci-plat.c | 3 +++ > 2 files changed, 6 insertions(+), 1 deletion(-) > > -- > 2.7.4 Please let me know your opinion about this series. Regards Sandeep
