Re: USB 3.2 Gen 2x2 "Superspeed+20GBps" support for ASM3242

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2021-12-30 21:30 GMT+08:00, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>:
> On Thu, Dec 30, 2021 at 09:10:14PM +0800, youling257 wrote:
>> where i can find the series patch?
>> https://patchwork.kernel.org/project/linux-usb/list/?series=427561
>
> There is nothing at that link.
>
> What is the lore.kernel.org link for the patch you are curious about?
>
>> when i used maiwo k1690(10gbps) connect to ASM3242 Controller, only
>> 500MB/s.
>> cat /sys/devices/pci0000:00/0000:00:01.3/0000:09:00.0/usb3/speed, 480
>> cat /sys/devices/pci0000:00/0000:00:01.3/0000:09:00.0/usb4/speed, 20000
>> maiwo k1690 is on
>> /sys/devices/pci0000:00/0000:00:01.3/0000:09:00.0/usb4/4-1.
>> cat /sys/devices/pci0000:00/0000:00:01.3/0000:09:00.0/usb4/4-1/speed,
>> 5000
>>
>>
>> 01:00.0 USB controller: ASMedia Technology Inc. ASM3242 USB 3.2 Host
>> Controller (prog-if 30 [XHCI])
>>         Subsystem: ASMedia Technology Inc. ASM3242 USB 3.2 Host
>> Controller
>>
>> [    0.359281] xhci_hcd 0000:01:00.0: xHCI Host Controller
>> [    0.359283] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus
>> number 2
>> [    0.359285] xhci_hcd 0000:01:00.0: Host supports USB 3.2 Enhanced
>> SuperSpeed
>>
>> [ 1191.734123] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
>> [ 1191.794767] usb-storage 4-1:1.0: USB Mass Storage device detected
>> [ 1191.795049] scsi host9: usb-storage 4-1:1.0
>> [ 1051.051274] scsi 9:0:0:0: Direct-Access     Realtek  USB 3.2 Device
>> 1.00 PQ: 0 ANSI: 6
>> [ 1051.051442] sd 9:0:0:0: Attached scsi generic sg0 type 0
>> [ 1051.054461] sd 9:0:0:0: [sda] 500118192 512-byte logical blocks: (256
>> GB/238 GiB)
>> [ 1051.055068] sd 9:0:0:0: [sda] Write Protect is off
>> [ 1051.055073] sd 9:0:0:0: [sda] Mode Sense: 37 00 00 08
>> [ 1051.055716] sd 9:0:0:0: [sda] Write cache: disabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [ 1051.072131]  sda: sda1 sda2
>>
>> i don't have NVMe to USB 2x2 Enclosure (ASM2364 chipset), i have NVMe to
>> USB 2x1 Enclosure (RTL9120B chipset), maiwo k1690, using it on PciExpress
>> X4 add in card (ASM3242 chipset), it only 5Gbps speed, should be 10Gbps.
>>
>
> Are you sure that your hardware can really support this?  Do you have
> the right cable and the device will support this speed?
02:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 400 Series
Chipset USB 3.1 XHCI Controller (rev 01) (prog-if 30 [XHCI])
        Subsystem: ASMedia Technology Inc. 400 Series Chipset USB 3.1
XHCI Controller

maiwo k1690 connect to mainboard usb3.2 gen2x1 port can 10gbps.
[ 1049.965556] usb 2-2: new SuperSpeed Plus Gen 2x1 USB device number
2 using xhci_hcd
[ 1050.028280] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 1050.028560] scsi host9: usb-storage 2-2:1.0

pcie to usb3.2 gen2x2 asm3242 should be compatible usb3.2 gen2x1.
I don't have windows os to test them, may be 5gbps on windows yet.
Is there a way to hack them to 10Gbps on linux?

> And most important, what kernel version are you using?
kernel 5.16 rc7.
> thanks,
>
> greg k-h
>



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux