Re: [PATCH 5/5] comedi: vmk80xx: fix bulk and interrupt message timeouts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25/10/2021 12:45, Johan Hovold wrote:
USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.

Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.

Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@xxxxxxxxxxxxxxx      # 2.6.31
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
  drivers/comedi/drivers/vmk80xx.c | 12 +++++++-----
  1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/comedi/drivers/vmk80xx.c b/drivers/comedi/drivers/vmk80xx.c
index 9c56918e3b76..4b00a9ea611a 100644
--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -91,6 +91,7 @@ enum {
  #define IC6_VERSION		BIT(1)
#define MIN_BUF_SIZE 64
+#define PACKET_TIMEOUT		10000	/* ms */
enum vmk80xx_model {
  	VMK8055_MODEL,
@@ -169,10 +170,11 @@ static void vmk80xx_do_bulk_msg(struct comedi_device *dev)
  	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
  	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
- usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     tx_size, NULL, devpriv->ep_tx->bInterval);
+	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL,
+		     PACKET_TIMEOUT);
- usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL,
+		     PACKET_TIMEOUT);
  }
static int vmk80xx_read_packet(struct comedi_device *dev)
@@ -191,7 +193,7 @@ static int vmk80xx_read_packet(struct comedi_device *dev)
  	pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
  	return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf,
  				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
  }
static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
@@ -212,7 +214,7 @@ static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
  	pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
  	return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf,
  				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
  }
static int vmk80xx_reset_device(struct comedi_device *dev)


Looks good, thanks!

Reviewed-by: Ian Abbott <abbotti@xxxxxxxxx>

--
-=( Ian Abbott <abbotti@xxxxxxxxx> || MEV Ltd. is a company  )=-
-=( registered in England & Wales.  Regd. number: 02862268.  )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux