USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.
Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.
Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.
Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@xxxxxxxxxxxxxxx # 2.6.31
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/comedi/drivers/vmk80xx.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/comedi/drivers/vmk80xx.c b/drivers/comedi/drivers/vmk80xx.c
index 9c56918e3b76..4b00a9ea611a 100644
--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -91,6 +91,7 @@ enum {
#define IC6_VERSION BIT(1)
#define MIN_BUF_SIZE 64
+#define PACKET_TIMEOUT 10000 /* ms */
enum vmk80xx_model {
VMK8055_MODEL,
@@ -169,10 +170,11 @@ static void vmk80xx_do_bulk_msg(struct comedi_device *dev)
tx_size = usb_endpoint_maxp(devpriv->ep_tx);
rx_size = usb_endpoint_maxp(devpriv->ep_rx);
- usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
- tx_size, NULL, devpriv->ep_tx->bInterval);
+ usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL,
+ PACKET_TIMEOUT);
- usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
+ usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL,
+ PACKET_TIMEOUT);
}
static int vmk80xx_read_packet(struct comedi_device *dev)
@@ -191,7 +193,7 @@ static int vmk80xx_read_packet(struct comedi_device *dev)
pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf,
usb_endpoint_maxp(ep), NULL,
- HZ * 10);
+ PACKET_TIMEOUT);
}
static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
@@ -212,7 +214,7 @@ static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf,
usb_endpoint_maxp(ep), NULL,
- HZ * 10);
+ PACKET_TIMEOUT);
}
static int vmk80xx_reset_device(struct comedi_device *dev)
--
2.32.0
